JVC PD-42WV74 manual Connecting the TV and receiver, Disconnecting the system cable

Quick Setup Getting Started

Connecting the TV and receiver

Use the supplied system cable to connect the TV to the receiver.

The two connectors are of different shapes. Ensure that the pins on connector 1 are oriented correctly, press the connector into the socket, and tighten the screws at left and right to lock it in place.

Press connector 2 firmly into place until it is locked.

1 2

Disconnecting the system cable

Release connector 1 by unscrewing the screws at left and right and removing it from the socket.

Release connector 2 by removing it from the socket while pressing the release bottoms on either side.

Use the supplied power cord which best suits the area in which you live.

Back of the TV AC INLET Power cord

AC INLET

Power cord

Back of the receiver

Insert the AC plug into a correctly grounded outlet.

•Remove the AC plug from the outlet to completely disconnect the TV from the power supply.

Receiver rear

SUB	AUDIO OUT
WOOFER
OUT
		R-AUDIO-L	VIDEO
			DIGITAL IN
	Pb	Pb
			DISPLAY OUT(SYSTEM CABLE)
AV	Pr	Pr

COMPULINK

12

Connecting the power cord to the AC outlet

Insert the AC plugs on the power cords from the TV and receiver into AC outlets.

Caution

•Operate only from the power source specified (AC 120V, 60 Hz) on the unit.

•Failure to use the supplied power cord or to insert it into a correctly grounded outlet may result in electric shocks.

13