JVC 1004MKH-CR-VP, LCT1774-001A „ Poor sound, „ If the TV does not respond to the remote control

Page 51

Troubleshooting

ENGLISH

•When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal. There is nothing wrong with the TV.

•Since this TV is designed to make full use of the resolution of the original video source, the motion may appear unnatural when the video source is input with 576p progressive-scanning component signals. If this occurs, change the output setting of the connected device to 576i interlace- scanning component signal output. See the instructions that came with the device for more information.

„Poor sound

•Have you adjusted BASS or TREBLE properly? If not, follow the description “BASS” or “TREBLE” on page 30.

•When TV channel reception is poor, it can be hard to hear stereo or bilingual sound. In this case, follow the description “STEREO / I • II” on page 30 to hear the sound more easily by changing it to a mono sound.

•If you cannot hear the normal sound even if the picture of the TV channel appears normally. Follow the description “EDIT/ MANUAL” on page 35 to use the MANUAL function to change the SYSTEM setting.

„If the TV does not respond to the remote control

•Have the batteries of the remote control worn out? Follow the description “Putting the batteries into the remote control” on page 9 and replace them with new batteries.

•Have you attempted to use the remote control from the sides or rear of the TV or from more than seven metres away from the TV? Use the remote control in front of your TV or from less than seven metres away.

•When you are viewing a teletext programme, you cannot operate the menus. Press the 4button to return to the ordinary TV programme, and then try operating the menus.

•If the TV suddenly stops responding, press the Abutton on the TV and turn off the TV. Press the Abutton again to turn on the TV. If the TV returns to a normal state, it is not a failure.

„Other issues

•If the CHILD LOCK function set to ON, you cannot operate the TV with the front control buttons of the TV. Set the CHILD LOCK function to OFF.

•When the SLEEP TIMER function or AUTO SHUTOFF function operates, the TV is automatically turned off. If the TV suddenly turns off, try to press the # (standby) button to turn on the TV once again. If the TV goes back to normal, there is no problem.

•When the TV is receiving a wide-screen signal (WSS) or a signal from an external device affecting the screen size, the ZOOM mode automatically changes. When you want to resume the previous ZOOM mode, press the cbutton again.

•If you bring magnetised equipment such as a speaker near to your TV, the picture may be warped or unnatural colours may appear at the corners of the screen. In this case, keep the equipment away from your TV. If speakers cause this to happen, use magnetically-shielded speakers instead.

•It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed. This is not a fault. This is the time needed for the image to stabilize before it can be displayed.

•The TV may make a crackling sound due to a sudden change in temperature. The picture or sound may be normal. If you hear crackling sounds frequently while you are viewing the TV, there may be other causes. As a precaution, ask your service technician to inspect it.

•Touching the screen may cause you to feel a slight electric shock due to its static electricity. This is unavoidable due to the construction of the picture tube. It is not a problem with the TV. You can rest assured that this static discharge is not harmful.

50

Page 50 Page 52
Image 51
Page 50 Page 52
Contents PD-Z42DX4 Distance recommendations If Burn-in has occurred „ Do not view for long periods of time in the Regular modeBurn-in Avoid burn-in as followsPixel defects Effect on infrared devicesPicture Management demonstration Contents Checking the contents of packages Setting up your TV Installation„ Only use JVC approved accessories with your model Connecting the aerial and video cassette recorder VCR „ If not connecting a VCR see Fig. a„ If connecting a VCR see Fig. B Connecting the power cord to the AC outlet „ Rear PanelBack of the TV Putting the batteries into the remote control Initial settings Setup tourPress the Abutton on the TV Press the a button Now, setting up is complete. Please enjoy your new JVC TVTV buttons and functions Turn the TV on from standby modeAdjust the volume Using the MenuRemote control buttons and functions Turn the TV on or off from standby modePress the # standby button to turn the TV on or off Choose a TV channel and watch images from external devices To return to a TV channelTo use the programme number PR 0 AV Channel number display Press the 7q buttons to adjust the volumeDisplay function PR ListZoom function „ Choose the Zoom modeUsing the Freeze function „ Adjusting the visible area of the pictureCinema Surround function Pictures multi Using the MULTI-PICTURE functionTo cancel the Freeze function Press the XbuttonReturn Plus function and Return function „ Return Plus„ Return function „ Calling the favourite channel „ Setting the picture effectFavourite channel function „ Favourite channel registrationSet the PIP/TV/DVD Switch to the DVD position Operating a JVC brand DVD playerPress the DVD Control Button to control your DVD player „ To store the page numbers Using the List ModeTeletext function Basic operationSize Sub-pageReveal HoldPress the G Index button CancelPress H Cancel button IndexPress the Hbutton to display the menu bar Using the TV’s menuUsing the TV’s menu Picture menu Features „ Digital VNR„ Super DigiPure „ Colour System „ Colour Management„ Pull Down „ Picture ManagementPAL „ 43 Auto AspectMain SUBSound menu BBE SpeakerCenter „ To set the Channel Guard function Features menuSleep Timer Channel Guard„ To view a locked TV channel AppearanceAuto Shutoff Favourite SettingBlue Back Child LockMove SET UP menuAuto Program EDIT/MANUALManual „ Basic operation„ Move Delete„ Delete „ ID„ Insert Press the green or red button to search for a TV channel „ ManualVideo AI VolumeVIDEO-1 SETTING/VIDEO-3 Setting LanguageFast Hdmi SettingTeletext Language Picture Shift SlowDisplaying a computer screen Connecting to the computerTable of signals for each type of computer When a picture is not displayedAdditional preparation Connecting external equipment„ Connecting the PC Before connecting anything„ TV output from the OUT terminal „ Connecting headphones„ Connecting speakers/amplifier „ Using the TV speaker as the surround centre speakerConditions to use the AV Compu Link remote control system „ Connecting AV Compu Link supported devicesIf a DVD player is connected to the VIDEO-2 terminal If a VCR is connected to the VIDEO-1 terminalIf a DVD player is connected to the VIDEO-1 terminal If a VCR is connected to the VIDEO-2 terminalUsing the Hdmi terminal „ Connecting a Hdmi compatible device„ Setting Hdmi Setting When setting Size When setting AudioPress the 6 buttons and choose Size or Audio Oirt CH/CC numbers„ No picture or no sound Troubleshooting„ If you cannot turn on the TV „ If you cannot turn off the TV„ If the TV does not respond to the remote control „ Other issues„ Poor sound We may change the design and specifications without notice SpecificationsEnglish Victor Company of Japan, Limited 1004MKH-CR-VP
Top Page Image Contents