Peripheral Equipment Connections, RGB mode

For Fastext and Toptext

The subject-heading for the information may have a particular colour.

•Press an appropriate RED, GREEN, YELLOW or BLUE button in order to reach the relevant page quickly.

For TOPTEXT

If Toptext transmission is present, colour coded buttons will appear in status row.

If Toptext transmission is not present, status row will not appear.

In Toptext mode the “” or “” com- mands will request the next or previous page respectively. If Toptext transmission is not available, in case of operation of these commands, wraparound occurs. For ex- ample page 100 appears to be one greater than page 199.

Peripheral Equipment

Connections

There is a wide range of audio and video equipment that can be connected to your TV.

Connection diagrams at the and of this sec- tion show you where the different equipment should be connected at the back side of the TV.

Via the Euroconnector

Your TV set has 2 Euroconnector sockets. If you want to connect peripherals (e.g. video, decoder, etc.) which have Euroconnectors, to your TV, use EXT-1 or EXT-2input.

If an external device is connected via Euro- connector sockets TV is switched to AV mode automatically. In this case if both sockets are connected, SCART1 has the precedence.

T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible VCR to the EXT.2 terminal. If not, the T-V LINK function will not work properly.

•When connecting a T-V LINK compatible VCR to the EXT.2 terminal, be sure to con- nect the decoder to the VCR. If not, the T-V LINK function may not work properly. And then set the Decoder (EXT-2) function for the channel to ON to unscramble a scrambled channel.

RGB mode

If an equipment can output the RGB signals, connect it to the EXT-1 or EXT-2 terminal.

EXT-2 S Mode

If the equipment connected to your TV set supports S-Video (Y/C) output from Eurocon- nector, you can have a better picture quality by selecting EXT-2 S mode and connecting your equipment to the EXT.2 (EXT-2 S) ter- minal of TV. See your equipment's booklet to check if your equipment has such feature.

- 39 -