Troubleshooting, Basics | JVC 0706TKH-MW-VPC, LCT2132-001A instruction

Troubleshooting

Severe noise or snow

Is the TV connected correctly to the aerial?

Change the direction of the aerial. Is the aerial or its cable damaged?

Consult your retailer

Problem

		Remote control stops
	Basics	working
	Basics	Front control buttons do
		Front control buttons do
		not work
		Aspect ratio changes
		unintentionally

Actions

Unplug the TV, and wait about 1 hour until the lamp completely cooled. Then plug the TV in again. (Turning on the TV soon may shorten the lamp life.)

Switch “Child Lock” to “Off.”

Press “ ” to return to your settings.

page

Patterns, stripes or noise

Is the aerial receiving interference from high-voltage power lines or wireless transmitters?

Consult your retailer

Are connected devices too close to the TV?

Insert the minimum distance between the aerial and the cause of interference until no interference

I can’t turn it on!

Is the power cord connected to the AC outlet correctly?

Screen	Black or white dots
	appear on the screen

PC screen alignment is off

The screen is dim

Poor picture quality

Although the HD-ILA element is manufactured with high- precision technology, please understand that some pixels may be lost or permanently displayed.

Adjust the “PC Position.”

Adjust the “Iris” brighter.

Unnatural colour >>> Adjust “Colour” and “Bright.” Check your “Colour System.”

If “Auto” is selected, select the specific colour system manually.

Noise >>> Set to the following functions. Picture Mode : Standard

Super DigiPure : Max

Ghosting

(Doubling of images)

Are you receiving interference from signals reﬂected off mountains or buildings?

Adjust the direction of your aerial, or change to a good-quality directional aerial

The remote control doesn’t work!

Are the batteries ﬂat?

Are you more than 7 metres away from the TV?

Is the “MODE (TV, VCR/DVR, DVD, AUDIO)” set to “TV”?

When viewing teletext, the TV menu bar does not appear. Depending on the stability of the signal, there may be a time lag when changing channels.

Picture

Strange picture when using an external device

Blue screen appears on the screen

Dull picture >>> Set to the following functions. Picture Mode : Bright

Super DigiPure : Min

If the top of the image is distorted, check the video signal quality itself.

If movement appears unnatural when receiving a signal from a DVD player, etc. with 625p (progressive-scanning), change the output setting of the external device to 625i (interlace- scanning).

Switch “Blue Back” to “Off.”