4 Install the NEW lamp unit
1 Unpack
Do not drop the lamp!
Do not shock the glass surface of the lamp!
It may shatter the lamp causing injuries.
Never touch the glass
!surface of the lamp!
Oils deposited from the finger may cause a difference in temperature when the lamp heats up to its operating temperature, causing the lamp to break.
6 | Reset the lamp timerDisplay the menu bar |
| 1 |
2 Select “Set Up” | select |
Set Up | next |
| |
3 Select “Lamp Timer Reset” | |
Set Up | select |
Auto Program |
|
Edit/Manual |
|
Language | Video |
Video | |
AI Volume | Off |
Teletext Language |
|
IMPORTANT! PREPARE
2 Insert
Make sure the lamp sits securely and fl at in the housing area.
3 Reinstall the lamp cover
Tighten the screw.
5 | Plug in the TV |
Turn the TV on
If the lamp unit is not installed securely (e.g. fl at in the lamp housing area), the TV won’t turn on. In this case, reinstall the lamp unit.
|
|
| HDMI Setting |
|
|
| ||
|
|
| PC Position |
|
|
| ||
|
|
| Lamp Timer Reset |
|
|
| ||
|
|
|
|
|
| next | ||
|
| 4 Finish |
|
|
| |||
|
|
| Press OK to Reset |
|
|
| The Lamp Timer is |
|
|
|
| the Lamp Timer |
|
|
| Reset Successfully |
|
|
|
|
|
|
|
|
| |
7 | Finally, the lamp has been replaced! |
|
|
| ||||
! | Never dispose of the lamp with normal trash! |
|
|
| ||||
| The lamp contains a small amount of mercury. For disposal or recycling information, please | |||||||
contact your local authorities or consult your retailer.
Dispose of it in the same way as disposing of fluorescent lamps.
If the power lamp and LAMP indicator blink rapidly after turning on the TV 
“Lamp” (P. 21)
USE
SETTINGS TROUBLE?
5