Programming Your Remote
Search Code Function
This function searches for codes one by one if none of the codes listed for your device has worked.
1)Manually turn on the device.
2)Change the remote control mode according to the device. Press MODE to select the correct mode.
3)Activate the search code function. Press and hold POWER and RETURN+/TV until the mode indicator blinks.
4)Point the remote at the device and press POWER. If no response, try the next code by
pressing and POWER until the device turns off.
5)Press RETURN+/TV to register and set the code. Then the MODE indicator light goes out.
Notes:
•If your remote still doesn’t work with the “Search Code Function”, use the remote that came with your device. Your TV remote can not be guaranteed to work with all devices, modes or operations.
Remote Control Functions
POWER
Turns the selected device off
–CH + Channel Up / Down
–VOL + Volume Up / Down
SUB T. Displays Subtitles
Open / Close
MODE TV STB VCR DVD AUDIO | Changes the remote control mode |
V1 V2 V3
Operates menus
Select
Display | U |
menu | N |
E | |
| M |
V4 V5
OK
B A C K
Audio Input Selection
Back to 
previous
menu
Playback / Record, etc.
| Play |
|
Rewind |
| Forward |
| iTV |
|
Record | Stop | Pause |
FA
OK
52