JVC LT-32A60BU, LT-32A60SU manual „ Poor sound

Page 101

Troubleshooting

•Videotaping teletext is not recommended because it may not record correctly.

•When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal. There is nothing wrong with the TV.

•Since this TV is designed to make full use of the resolution of the original video source, the motion may appear unnatural when the video source is input with progressive-scanning component signals. If this occurs, change the output setting of the connected device to interlace- scanning component signal output. See the instructions that came with the device for more information.

„Poor sound

•Have you adjusted BASS or TREBLE properly? If not, follow the description “BASS” or “TREBLE” on page 28.

•When TV channel reception is poor, it can be hard to hear stereo or bilingual sound. In this case, follow the description “STEREO / I • II” on page 28 to hear the sound more easily by changing it to a mono sound.

„If the TV does not respond to the remote control

•Have the batteries of the remote control worn out? Follow the description “Putting the batteries into the remote control” on page 7 and replace them with new batteries.

•Have you attempted to use the remote control from the sides or rear of the TV or from more than seven metres away from the TV? Use the remote control in front of your TV or from less than seven metres away.

•When you are viewing a teletext programme, you cannot operate the menus. Press the b button to return to the ordinary TV programme, and then try operating the menus.

•If the TV suddenly stops responding, disconnect the power cord of the TV from the AC outlet. Connect them to the AC outlet again to turn on the TV. If the TV returns to a normal state, it is not a failure.

„Other issues

•When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV suddenly turns off, try to press the #(standby) button to turn on the TV once again. If the TV goes back to normal, there is no problem.

•When the TV is receiving a wide-screen signal (WSS) or a signal from an external device affecting the screen size, the ZOOM mode automatically changes. When you want to resume the previous ZOOM mode, press the cbutton again.

•It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed. This is not a fault. This is the time needed for the image to stabilize before it can be displayed.

•The TV may make a crackling sound due to a sudden change in temperature. The picture or sound may be normal. If you hear crackling sounds frequently while you are viewing the TV, there may be other causes. As a precaution, ask your service technician to inspect it.

47

Page 100 Page 102
Image 101
Page 100 Page 102
Contents LCD TV LT-32A60BU LT-32A60SU LT-26A60BU LT-26A60SUDistance recommendations Pixel defectsDo not block the TV’s ventilation openings or holes „ Cleaning the screenContents Installation Setting up your TVUsing the stand „ Rotate the TV to the left and rightRemoving the terminal cover Connecting the aerial and video cassette recorder VCR Putting the batteries into the remote control Connecting the power cord to the AC outletInitial settings Press the # button on the remote controlPress the abutton If you do not have a T-V Link compatible VCR connected Press the abutton to display the T-V Link menu„ Downloading the data to VCR Link functionsTurn on the VCR Press the abutton To use T-V Link functions„ Pre-set download When Feature not Available is„ Direct Rec DisplayedTV buttons and functions Turn the TV on from standby modeChoose a TV channel Watch images from external devicesUsing the Menu Adjust the volumePress the r Volume q buttons Use the MENU/OK buttonPress the # standby button to turn TV on or off Remote control buttons and functionsTurn the TV on or off from Standby mode To use the programme number PR 0 AV Choose a TV channel and watch images from external devicesTo return to a TV channel Information function Press the r q buttons to adjust the volumeChannel number display Time displayZoom function „ Choose the Zoom modeZoom Press the c button to display the Zoom menu3D Sound function „ Adjusting the visible area of the pictureReturn to TV channel instantly Favourite channel function „ Setting the picture effect„ Favourite channel registration „ Calling the favourite channelOperating a JVC brand VCR or DVD player Set the VCR/TV/DVD Switch to the VCR or DVD positionPress B button to go into the List mode Using the List ModeTeletext function Basic operationReveal Sub-pageHold SizePress H Cancel button CancelIndex Press the G Index buttonButtons used to operate the menus Using the TV’s menuPress the Hbutton to display the menu bar Types of menu Picture menuPicture menu Picture ModeNtsc Choose Colour SYSTEM. Then press the a or 3 buttonChoose 43 Auto Aspect then press the a button Press the 6 buttons to choose a Zoom modeStereo / I Sound menu„ To set the Child Lock function Features menu„ To view a locked TV channel Choose Favourite SETTING, then press the a or 3 button Favourite SettingChoose Auto PROGRAM, then press the a or 3 button SET UP menuChoose EDIT/MANUAL, then press the a or 3 button „ Basic operationBefore performing Insert or Manual operation „ IDPress the 6buttons to choose a character Other TV channels To cancel the Insert functionTo cancel the Decoder EXT-2 function Display the SET UP menu and choose Decoder EXT-2Press the a button to complete the setting Press the green or red button to search for a TV channelPreparation Choose EXT SETTING, then press the a or 3 button„ S-IN S-VIDEO input Press the 5 or 6 buttons to choose an EXT terminal To cancel the S-IN S-VIDEO input settingPress the 5 buttons to choose the arrow from the menu EXT-1/EXT-3SET UP menu Table of signals for each type of computer Connecting to the computerWhen a picture is not displayed Displaying a computer screen„ Connecting the PC Connecting external equipmentBefore connecting anything Additional preparationWithout terminal covers „ Video or sound signal output from the EXT-2 terminal „ Connecting headphones„ TV output from the EXT-1 terminal „ T-V Link compatible VCRChannel CH/CC numbersCH/CC numbers „ If you cannot turn on the TV Troubleshooting„ If you cannot turn off the TV „ No picture or no sound„ Poor sound „ If the TV does not respond to the remote control„ Other issues Troubleshooting We may change the design and specifications without notice SpecificationsSpecifications Page LT-32A60SJ LT-26A60SJ „ Warning How to replace the fuse„ If in doubt consult a competent electrician „ Guidelines for safe operationPixel defects „ Cleaning the screen Contents Setting up your TV Removing the terminal cover Connecting the aerial and video cassette recorder VCR Connecting the power cord to the AC outlet To cancel the Auto Program function Press the b button Press the a button to display the T-V Link menu Turn on the VCR Press the a button When Feature not Available is displayed TV buttons and functions Adjust the volume Remote control buttons and functions Choose a TV channel and watch images from external devices Adjust the volume Zoom Auto Regular Panoramic Return to TV channel instantly Favourite channel function Operating a JVC brand VCR or DVD player Teletext function Sub-page Index Choose to set the screen Picture menu Features Panoramic Regular 149 Zoom Sound menu To cancel the Sleep Timer function Appearance Favourite Setting SET UP Auto Program EDIT/MANUAL Language DECODEREXT-2 „ Move „ ID „ Manual Language EXT Setting menu appears „ Dubbing SET UP menu Displaying a computer screen Additional preparation Without terminal covers „ T-V Link compatible VCR E2, R1 CH 40 / CH E40, R40 CC 01 / CC CC 31 / CC S31 CH/CC numbers Troubleshooting „ Poor sound Troubleshooting Model LT-32A60SJ Model LT-26A60SJ
Top Page Image Contents