JVC LT-32A60SU, LT-32A60BU manual „ TV output from the EXT-1 terminal, „ T-V Link compatible VCR

Additional preparation

„Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-VHS VCR

Connect the equipment to an EXT terminal other than EXT-1/EXT-4.

You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “S-IN (S-VIDEO input)” on page 37.

„TV output from the EXT-1 terminal

The video/sound signal of a TV channel you are viewing is always output from the EXT-1 terminal.

•Changing over a programme number (PR) also changes over the TV output from the EXT-1 terminal.

•The video/sound signal from an EXT terminal cannot be output.

•Teletext programmes cannot be output.

ENGLISH

„T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible VCR to the EXT-2 terminal. If not, the T-V LINK function will not work properly.

•When connecting a T-V LINK compatible VCR to the EXT-2 terminal, be sure to connect the decoder to the VCR. If not, the T-V LINK function may not work properly.

•When you connect the decoder to the VCR, after you have stored TV channels in the programme numbers (PR) list, set the DECODER (EXT-2) function for the programme number (PR) to ON to unscramble a scrambled TV channel. For details, see “DECODER (EXT-2)” on page 36.

„Connecting headphones

Connect the headphones with a stereo mini- jack (3.5 mm diameter) to the headphone socket at the TV rear panel.

•No sound comes from the TV speakers when the headphones are connected.

„Video or sound signal output from the EXT-2 terminal

You can change over the output of the video/ sound signal from the EXT-2 terminal. This is useful when you want to dub the video/ sound from another device onto the VCR connected to the EXT-2 terminal. For details on how to do this, see “DUBBING” on page 38.

•The signals from EXT-4 and PC IN terminal cannot be output from EXT-2.

43