Remote control buttons and functions
Choose a TV channel and watch images from external devices
Use the number buttons:
Enter the programme number (PR) of the channel using the number buttons.
Example:
•PR 6 → press 6
•PR 12 → press 1 and 2
Use the p pbuttons: Press the p pbuttons to choose the programme number (PR) you want or an EXT terminal.
Use the AV button:
Press the AV button to choose an EXT terminal.
TV mode | EXT modes |
Programme
numbers
PR 1 – PR 99
or
•Since this TV is designed to make full use of the resolution of the original video source, the motion may appear unnatural when the video source is input with
•The PC sound is the same as the
To return to a TV channel:
Press the b button, the 6buttons or the number buttons.
To use the programme number PR 0 (AV):
When the TV and VCR are connected only by the aerial cable, choosing the programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the programme number PR 0 (AV) manually. For details, see “EDIT/ MANUAL” on page 32.
Pressing the Gbutton changes the choice as follows:
TV mode | EXT modes |
ENGLISH
or
Programme
numbers
PR 1 – PR 99
PR 0
or
or
•You can choose a video input signal from the
•If you do not have a clear picture or no colour appears, change the colour system manually. See “COLOUR SYSTEM” on page 26.
•If you choose an EXT terminal with no input signal, the EXT terminal number becomes fixed on the screen.
•The VCR sends its playback image along the aerial cable as an RF (radio frequency) signal.
•Also see your VCR instruction manual.
15