JVC 0205MKH-VT-VT manual Other Features, Sound Indicator, Hyper Sound, Mute Indicator

transmission of programme systems in			Other Features
your area.
		TV Status
		Programme Number, Programme Name
		(or EXT), (they are displayed on the upper
		left of the screen). The sound indicator is
		displayed with them too. They are displayed
First of all choose the “Country” by using
		after programme change for 3 seconds.
“ ” or “ ” button. Then press the Red but-
		Sound Indicator
ton to start Autostore.
After Autostore is finalized, a programme list		The alternatives of the indicator are Mono,
will appear on the screen. In the program list
		Stereo, Dual I and Dual II. This indicator is
you will see the programme numbers and
		displayed under the programme number in-
names assigned to the programmes.
		dicator on the screen.
If you do not accept the locations and/or the
programme names of programmes, you
		In Mono broadcast or in forced-mono (for
can change them in Programme menu.
		stereo broadcast).
Source Menu
You can switch your TV to EXT modes by		In Stereo broadcast.
pressing directly to “AV” button or by select-
ing in source menu from the main menu.		If dual broadcast detected. Dual I is selected
While in EXT mode, you can also switch your
		in default and also can be selected after
TV to TV or other EXT modes by selecting in
		Dual II by Remote Control.
source menu from the main menu.
In main menu, firstly use “ ” or “ ” button
		If Dual II selected by Remote Control.
then use “ ” / “ ” or “OK” button to enter
		Hyper Sound
Source menu. In source menu, move the
cursor by “ ” or “	” button and then press	By selecting Hyper Sound in sound menu or
“OK” button or “	” / “ ” buttons when the
		by pressing the “		” button on your remote
cursor is on the required item. The selected
		control, Pseudo/Spatial effect can be turned
mode comes automatically on the screen.
		on or off. In Mono transmission the left and
		right channels will be added at left channel
		and dummy stereo effect will introduced to
		end-user.
		In stereo transmission it yields a phase dif-
		ference between left and right channels.
		Mute Indicator
		It is placed in the upper middle of the screen
		when enabled, and it stays there until it is
		disabled.
		To cancel mute, there are two alternatives;
		the first one is by pressing the “ ” button,
	- 33 -