JVC 0205MKH-VT-VT manual Over AIR Download, Information Banner

Page 18

Programme Selection (Previous or next programme)

Press “ ” button to select the previous programme.

Press “ ” button to select the next programme.

Programme Selection (direct access):

Press digit buttons on the remote control to select programmes between 0 and 9. TV will switch to the selected programme. To select programmes between 10 - 99, press the digit buttons consecutively which programme you want to select (eg. for programme 27, first press 2 and then 7). When it is late to press second digit button only the first digit programme will be dis- played. The limit of the delay time is 3 sec- onds.

Example: PR6 press 6, PR12 press 1 and 2.

Press directly the programme number to reselect single digit programmes.

Hint: The channel list numbers are assigned by the broadcasters. Because not all channels are broadcast free-to-air and stored by the receiver, the channel list numbers do not run continuously. The fifteenth channel in the list, for example, may not be channel number 15 but

channel number 17.

Hint: If you enter a number which does not correspond to a stored channel, the next valid channel number is se- lected instead. If you enter a number greater than the highest numbered channel in the channel list, the IDTV will select the last channel in the list.

Operating while watching

IDTV

Pressing the “TV/DTV” button at any time while watching television programmes will switch the TV set between displaying the digital terrestrial television broadcasting and its normal analogue broadcasting.

It is also used to switch to the last watched mode (TV or DIGITAL TV) from the EXT mode. For example; if a DVD player is con- nected with a SCART cable and powered on, then the IDTV will automatically switch to EXT mode. The IDTV will switch to the last watched mode (TV or DIGITAL TV) if DVD

player is switched off or “TV/DTV” button is pressed.

EVERYDAY OPERATION

While using the IDTV to the full, there are great many buttons to use in different situa- tions. Many of the menu screens displayed by the IDTV have reminders as to which but- ton do what, at the base of the screen. In ad- dition, many screens have further help avail-

able which is displayed when the button is pressed, as prompted at the bottom right of the screen.

OVER AIR DOWNLOAD

Over Air Download (OAD): To ensure that your IDTV always has the most up-to-date information. Please ensure that after use it is set to its standby mode. At 3AM each day, the IDTV automatically searches for any new information which may be broadcast and will download this to your IDTV automatically. This operation will normally take approxi- mately 30 seconds.

If you want to do this, you need to set Auto- matic Download to “Enabled” in Receiver Upgrade setting. For details see page 23.

INFORMATION BANNER

Whenever you change channel, using the

/buttons or the number buttons, an information banner is displayed at the bottom of the screen. This will remain on the screen for approximately three seconds. The information banner can also be displayed at any time while watching TV by pressing the

button on the remote control. Pressing

the

button again removes the banner.

Hint: Not all channels broadcast the programme data. If the name and times of the programme is not available then “No Information” is displayed in the information banner.

- 17 -

Image 18
Contents LT-17D50BK LT-23D50BK Contents DO… For your safetySome DOs and DON’Ts for you Do NOT…Page Important Instruction BLUE-NEUTRAL BROWN-LIVEWhere to install Distance RecommendationImportant Information Please take note Care and disposalControl Panel Buttons Using the stand Remote Control Buttons VIDEO, PC, DigitalFeatures Follow to 7 to set up your TV Getting StartedConnecting an aerial VCR and mains Using the cable holder Switching the TV ON/OFF Link When recording Digital terrestrial broadcast- ing DVB-T Basic OperationsOver AIR Download Information BannerUsing the Electronic Programme Guide Electronic Programme Guide EPGDTV Menus Displaying the SubtitlesChoose Digital and press the OK but- ton DTV menu appears Timers DTV Timer Recording When recording on a T-V Link compatible VCR Configuration Cancelling the timer settingEdit PR List Pin code is changed appearsPage Installation Display the DTV Menu and using the orStallation First Time Installation Common InterfaceSetting The TV Menu SystemPicture Menu Setting Bright-2Only for 17D50BK Sound Menu Feature Menu Install MenuPage Program Menu AutostoreMute Indicator Other FeaturesSound Indicator Hyper SoundEXT Modes No-Signal Detection TV modeVolume Bar Zoom ModesPC Picture Position Menu PC ModeMain Menu in PC mode Zoom SubtitlePC Picture Menu PIP PictureSound in PC mode No-Signal and Out Of RangeDetection PC mode To operate TeletextSearching for a teletext To select a page of TeletextTo Stop Automatic Page Change While watching TVEXT-2 S Mode Via the EuroconnectorRGB mode Peripheral Equipment ConnectionsDecoder Connecting HeadphonesVia the ANT aerial socket TV and Video Recoder VCRConnecting the PC To connect to S-Video inputPeripheral Equipment Connections Headphone Audio Video For Satellite Receiver Decoder PC Input Typical Display Modes Model 17D50BK PC Input Typical Display Modes Model 23D50BK Tips Specifications ItemModelLT-23D50BK Corrections