Initial Settings (continued)
AUDIO
Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| AUDIO |
|
|
|
|
| |
| Dolby Digital |
|
| Bitstream |
| ||
| DTS |
|
| Bitstream |
| ||
| MPEG |
|
| PCM |
| ||
| Sample Freq. |
|
| 48KHz |
| ||
| DRC |
|
| Off |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| Move |
| Select | Exit | |
Dolby Digital / DTS / MPEG | DVD |
| |||||
Bitstream: Select “Bitstream” if you connect the DVD Player’s DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder.
PCM (for Dolby Digital / MPEG): Select when connected to a
Off (for DTS): If you select “Off”, the DTS signal is not output through the DIGITAL OUT jack.
Sample Freq. (Frequency) DVD |
| |
Initial | ||
If your receiver or amplifier is NOT capable of handling 96 KHz signals, | ||
| ||
select 48 KHz. When this choice is made, this unit automatically | Settings | |
96 KHz. When this choice is made, this unit passes each type of signal | ||
converts any 96 KHz signals to 48 KHz so your system can decode them. |
| |
If your receiver or amplifier is capable of handling 96 KHz signals, select |
| |
through without any further processing. |
| |
Check the documentation for your amplifier to verify its capabilities. |
| |
DRC (Dynamic Range Control) DVD |
| |
With the DVD format, you can hear a program’s soundtrack in the most |
| |
accurate and realistic presentation possible, thanks to digital audio |
| |
technology. However, you may wish to compress the dynamic range of |
| |
the audio output (the difference between the loudest sounds and the |
| |
quietest ones). This allows you to listen to a movie at a lower volume |
| |
without losing clarity of sound. Set DRC to On for this effect. |
|
19