LG Electronics DZ9500 owner manual Troubleshooting, Symptom Possible Cause Correction

Troubleshooting

Symptom		Possible Cause	Correction
No power.	•	The power cord is disconnected.	• Plug the power cord into the wall outlet
			securely.
The power is on, but the	•	No disc is inserted.	• Insert a disc. (Check that the DVD or
DVD player does not			audio CD indicator in the display
work.			window is lit.)
No picture.	•	The TV is not set to receive DVD signal	• Select the appropriate video input mode on
		output.	the TV.
	• The video cable is not connected		• Connect the video cable securely.
		securely.
No sound.	•	The equipment connected with the audio	• Select the correct input mode of the audio
		cable is not set to receive DVD signal	receiver so you can listen to the sound
		output.	from the DVD player.
	• The power of the equipment connected with		• Turn on the equipment connected with the
		the audio cable is turned off.	audio cable.
	• The AUDIO options are set to the wrong		• Set the Digital Audio Output to the
		position.	correct position, then turn on the DVD
			player again by pressing POWER.
The DVD player does not	•	An unplayable disc is inserted.	• Insert a playable disc. (Check the disc
start playback.			type, color system, and regional code.)
	•	The rating level is set.	• Cancel the rating function or change the
			rating level.
The remote control does	• The remote control is not pointed at the		• Point the remote control at the remote
		remote sensor on the DVD player.	sensor of the DVD player.
not work properly.
	• The remote control is too far from the		• Operate the remote control closer to the
		DVD player.	DVD player.

24