LG Electronics 3 owner manual Error Descriptions

18Using LG EzSign 3.0 Editor

Note

ꔈꔈ If you click the Cancel button while wireless transmission is in progress, the transmission will be canceled.

ꔈꔈ If the network status is not normal, it may take some time for the transmission to be canceled after clicking the Cancel button. In this case, please wait until the transmission is completely canceled.

ꔈꔈ In EzSign 3.0 Editor, you can select a TV to send content files to. After sending, all the existing content files saved on the TV are replaced with the new files.

ꔈꔈ If an error occurs while sending, a pop-up message will appear and the previous file is played.

ꔈꔈ The PC and the TV must be connected to the same router.

The IP address of the router must be set as 192.168.XXX.XXX.

ꔈꔈ To check the TV's serial number, select Menu >

Customer Support > Product/Service Information.

ꔈꔈ If this is the first time you are entering Send via Wireless Network, an empty TV list will be dis- played.

ꔈꔈ The Refresh function may take more than a minute depending on the network environment. If the network status is poor, clicking the Refresh button may not detect all the TVs connected to the router.

In this case, you can retry the automatic scan or select Add TV and enter the IP address manually.

ꔈꔈ TVs which already exist in the list are not added again, even when detected during Auto Scan.

ꔈꔈ To add a TV manually, enter its IP address.

ꔈꔈ Depending on the network or TV condition, the IP search may fail.

ꔈꔈ If this happens, check the network environment and try again.

ꔈꔈ If a TV shown on the list is not found on the current network, it is marked as Disconnected in the Status column.

ꔈꔈ You can remove a TV from the TV list by clicking Delete TV.

Notes When Sending to a TV

ꔈꔈ Depending on the size of content playlist to send or the network environment, it may take longer than 5 minutes.

ꔈꔈ Even when sending to a TV in the list, the sending may fail depending on the network or TV condition. If the sending fails, check the error message displayed on the screen and follow its instructions.

Error Descriptions

Error	Error Description	Actions
Text
TV or	The TV is turned off,	Please check
network	the network settings	the TV and
failure	of the PC are	network
	incorrect, or there	status.
	may be a problem
	with the wireless
	dongle or network
	equipment.
Another	Other content has	Try again
work in	already been	later. If the
progress	requested for the	error persists
	EzSign TV. The	even after
	EzSign TV is	retrying,
	currently processing	please restart
	other content that	the TV.
	has already been
	requested.
Transfer	Due to a transient	Please
file cre-	issue, an error	restart the
ation	occurred while	editor.
error	creating the files
	required for sending
	the content.
System	The tasks required	Please
failure	for operating the	reboot the
	EzSign Editor	system.
	cannot be performed	If the prob-
	because of an OS	lem persists,
	error.	please have
		an expert
		diagnose the
		OS.

NOTE

ꔈꔈ When updating the EzSign content, do not use USB update and wireless update simultaneously. The TV may show unexpected behavior.