LG Electronics 3 owner manual Setting TV, PIN mode connection, Simple setting WPS-button mode

20Using LG EzSign 3.0 Editor

PIN mode connection

1Follow steps 1 - 4 in Wireless Network Setup.

2Go to Connecting with PIN mode.

3In the web page of the wireless router (AP) you want to connect, enter the PIN number displayed on the screen and select Connect.

Connecting with PIN mode

Insert PIN number at the AP webpage and

press [Connect] button.

PIN Number: 19730704

Connect

For more information, check the AP manual.

ꔉ NEXT

ꕣ PREVIOUS ꕯ Exit



4After the network setting is complete, if you need to configure the network settings again, select Reconnect.

5Select IP Auto Setting or IP Manual Setting.

-If you select IP Manual Setting, manually enter information such as an IP address.

6When this is complete, press Exit.

Simple setting (WPS-button mode)

You can use a nearby wireless router, without having to select the wireless router's (AP) name.

1Check if the wireless router (AP) supports the Quick Setting (WPS-button mode).

2Follow steps 1 - 3 in Wireless Network Setup.

3Use the ︿ or ﹀ button to select Simple setting (WPS-button mode) and then press the OK button.

4Press the WPS-button mode button of the wireless router (AP) you want to connect and then click Connect.

5Follow steps 5 - 6 in PIN mode connection.

NOTE

How to Enter Letters or Numbers

*You can move the cursor on the screen to enter the required items, by pressing the Volume button on the remote control.

Setting TV

Using the TV Management function, you can send messages to the TV, adjust the volume, show/hide EzSign, set the No Signal screen, etc.



❶ ❷ ❸		❺	❻ ❼
	❹

❶	Adds a TV to the list by entering the IP
	address.
❷	Removes the selected TV from the list.
❸	Automatically scans TVs and adds them to
	the list.
❹	Renames the TV.
❺	Sends messages to the TV.
❻	Controls the TV.
❼	Sets the No Signal screen.