LG Electronics RU-52SZ53D POP Picture-outside-Picture, Selecting PIP / Twin Picture Channels

PIP (Picture-in-Picture) / Twin Picture Operation

Selecting PIP / Twin Picture Channels

1

2

Press the PIP button on the remote control to select PIP or Twin picture mode. Select the Ant/Cable source with the PIP INPUT button.

Use the PIPCH-/PIPCH+ button to select a channel for the sub picture.

Swapping Pictures

Press the SWAP button.

Each time you press the SWAP button, you switch the Main and Sub pictures.

It’s available to SWAP the Main and Sub picture in Ant/Cable, video 1-2, and front video input sources for Main picture.

Main Picture	Sub Picture
		Main Picture	Sub Picture

Moving the Sub Picture (PIP mode only)

In the PIP mode, each press of the UP/DOWN/LEFT/RIGHT arrow buttons will move the sub picture to a different position on the screen.

POP (Picture-outside-Picture)

Use POP to search the pictures of all the programmed chan- nels one-by-one on the 3 POP screen display, while the main screen remains the current channel.

1

2

Press PIP button on the remote control with the POP image on the screen to acti- vate POP (Picture-outside-Picture) mode. The pictures of all the programmed chan- nels are searched with the 3 POP screen, as shown to the right.

•Press SWAP, to enlarge the selected channel being searched on the POP screen to view it on the Main screen. (It’s available to use this function in Ant/Cable input source for Main and Sub picture.)

Press the EXIT button to exit POP mode.

Run EZ Scan channel search before using POP mode.

P A G E 2 7

Downloaded from www.Manualslib.com manuals search engine