LG Electronics RU-52SZ53D owner manual Troubleshooting Contd, Is selected Source equipment

Troubleshooting (Contd.)

Remote control doesn’t work.	• Make sure the batteries are fresh and installed properly.
Menu options can’t be	• Try unplugging your TV for a few minutes,
changed or selected.	then plug it back in.
No picture or sound	• Check to see if the source equipment has been turned on.
when any non-cable source	• Make sure that the connections are secure on the back of your TV and on the
is selected.	source equipment.

Weak or no Stereo Sound when using a stereo VCR.

•Check to see if all the connections are secure.

•Look in the Audio mode menu to see if all the settings are correct.

•You are using channel 3 or 4 to view your VCR. No stereo sound is present under that decision.

The PIP inset is black or lacks contrast.

•Check to be sure that the PIP source is turned on.

•You might want to adjust the PIP picture settings under the PIP menu.

•Check that all the wires are connected properly.

•Check to see if your input source for PIP is set correctly.

The PIP inset is “snow” when the source is Antenna.

•Look to see if the TV/VCR button on your VCR has the TV selected or change the PIP to another source.

Time is incorrect. • Reset clock manually.

P A G E 5 5

Downloaded from www.Manualslib.com manuals search engine