LG Electronics 52SX4D-UB VCR Setup, Analog and Digital TV signals provided on cable and antenna

Installation

3. Analog and Digital TV signals provided on cable and antenna

Antenna

Bronze Wire

RF Coaxial Wire (75 ohm)

Turn clockwise to tighten.

Cable TV Wall
Jack	RF Coaxial Wire (75 ohm)

ANTENNA

CABLE

Signal

Amplifier

Bronze Wire

•To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

•If the antenna needs to be split for two TV’s, install a “2- Way Signal Splitter” in the connections.

•If the antenna is not installed properly, contact your deal- er for assistance.

Note: The TV will let you know when the TV(analog antenna), DTV(digital antenna), CATV(analog cable) and CADTV(digital cable) channel scans are complete.

VCR Setup

Connection Option 1

Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number.

Connection Option 2

1.Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as shown in the figure.

When connecting the TV to VCR, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). If you connect an S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input.

2.Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

3.Select the input source with using the TV/VIDEO button on the remote control. Note that this TV finds the connected input sources automatically for Video, Front Video and Component 1-2. It is presumed that RGB, HDMI1/DVI and HDMI2 sources are connected.

Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work.)

	ANTENNA
G-LINK
DIGITAL AUDIO	UPGRADE
OPTICAL OUTPUT	PORT
C	RGB INPUT

a	DIGITAL AUDIO
	OPTICAL INPUT1	PC/DTV
	(COMPONENT2)		S-VIDEO
b		(XGA
l		CABLE

e	DIGITAL AUDIO
C	OPTICAL INPUT2		/1080i)
	(DVI)	COMPONENT
A
		INPUT2 INPUT1		MONITOR	VIDEO	VIDEO
R			RGB/DVI INPUT
				OUTPUT	INPUT2	INPUT1
D
			(L)			VIDEO
		Y	AUDIO
IEEE-1394			(R)			(L)
		PB		MONO		AUDIO
HDMI1						(R)
		PR
/DVI

(L)	(L)	VARIABLE
HDMI2
AUDIO	AUDIO	AUDIO OUT
(R)	(R)

DTV/DVD INPUT

1 2

ANT OUT
ANT IN	S-VIDEO	OUT	VCR Rear

OUTPUT		VIDEO	(R) AUDIO (L)
SWITCH
3	4	IN

Owner’s Manual 13