Troubleshooting Checklist
Troubleshooting Checklist
Some channel numbers in the Guide are incor- rect.
I have not received any
Guide listings.
A show I set to Record
did not occur.
•You can correct them using Change Channel Display under Setup.
•Listings usually appear within 24 hours after a successful Setup.
•It may take up to a week to fill the Listings grid with the full 8 days of listings.
•If you see a Listings grid with the message "No Listings" displayed you should start to receive updated program listings within 24 hours. To receive listings:
WMake sure the cable box is left On, if applicable.
WTurn off your recorder when not in use.
•If the message "No data for this screen" is displayed:
WCheck the connections between the TV, cable, antenna, and the IR cable if using a cable box.
WVerify Setup information under Change System Settings.
WMake sure the cable box is On, if applicable.
WIf this message is still displayed after multiple days, please contact the LG® Brand Customer Support.
•Make sure your recorder is turned Off before the recording begins.
•Make sure there is a tape.
•Check the Schedule menu and verify that the show is listed before recording begins.
•Check the placement of the IR cable in front of your recorder.
•Check the Schedule menu and verify that the show is listed as a Reminder.
•Highlight the show under Listings and do the following:
WPress the Menu key on the remote.
I set a show to
and it did not.
I set a show with the
Power On TV option and
it did not.
WUse the down arrow to highlight Edit Reminder, and press ENTER.
WVerify the
•The TV must be On at the scheduled time for
•If you have a cable box, check the IR cable.
•Check the Schedule menu and verify that the show is listed as a Reminder.
•Highlight the show under Listings and do the following:
WPress the Menu key on the remote.
WUse the down arrow to highlight Edit Reminder, and press ENTER.
WVerify the Power On TV option reads Yes.
98 DLP Projection TV