Terminal Panel
From Option control unit
English
AC IN connector
Connects with the supplied power cord.
Main Power Switch
On/Off switch to turn main power ON/OFF.
RGB/HV IN [R, G, B, H, V] (BNC)*
To input analog RGB signals or signals from other RGB equipment.
This is also to connect equipment such as a DVD player, HDTV device and
This input can be used with an RGB, DVD/HD or Video source. Please select signal type in TERMINAL SETTING.
DISPLAYPORT connector
To input DisplayPort signals.
HDMI connector
To input digital HDMI signals.
DVI connector (DVI-D)
IN connector: To input digital RGB signals from a computer or HDTV device having a digital RGB output.
* This connector does not support analog input.
OUT connector: To output the DVI signal from either DVI IN or HDMI connection.
VGA IN (mini
To input analog RGB signals from a personal computer or from other RGB equipment.
VIDEO1 IN connector (BNC)
To input a composite video signal.
LAN port
LAN connection. See page 33.
RS-232C (D-Sub 9 pin)
IN connector: Connect
OUT connector: Connect
REMOTE IN (Black)
Use the optional wired remote control by connecting it to your monitor.
NOTE: Do not use this connector unless specifi ed.
AUDIO OUT (Blue)
To output the audio signal from the AUDIO IN 1, DPORT and HDMI to an external device (stereo receiver, amplifi er, etc.).
AUDIO IN 1 (Blue)
To input audio signal from external equipment such as a computer, VCR or DVD player.
EXTERNAL SPEAKER TERMINAL
To output the audio signal from AUDIO 1, DPORT and HDMI. Red terminal is plus (+).
Black terminal is minus
Note: This speaker terminal is for 15W + 15W (8 ohm) speaker.
Internal/External speaker switch
Switch to turn internal speaker/external speaker.
: Internal speaker 
: External speaker.
NOTE: Please power off the monitor when you use Internal/ External speaker switch.
Option board slot
Slot 2 type accessories are available. Please contact your supplier for detailed information.
NOTE: Please contact your supplier for available option board.