INFORMATION OSD | Selects whether the information OSD is displayed or not. The information OSD will be displayed | ON, 3 Sec. | |
|
| when the input signal or source changes. The information OSD will also give a warning when |
|
|
| there is |
|
|
| An interval between 3 to 10 seconds for the Information OSD to appear is available. |
|
|
|
|
|
MONITOR INFORMATION | Indicates the model and serial number of your monitor. | - | |
|
| CARBON SAVINGS: Display the estimated carbon saving information in |
|
|
| footprint factor in the carbon saving calculation is based on the OECD (2008 Edition). |
|
|
| CARBON USAGE: Display the estimated carbon usage information in |
|
|
| arithmetic estimation, not actual measurement value. This estimation is based without any |
|
|
| options. |
|
|
|
|
|
OSD TRANSPARENCY | Set the transparency of the OSD. | ON | |
|
|
|
|
OSD ROTATION | Determines the OSD display direction between landscape and portrait. | LANDSCAPE | |
|
|
|
|
| LANDSCAPE | Display the OSD with landscape mode. |
|
|
|
|
|
| PORTRAIT | Display the OSD with portrait mode. |
|
|
|
|
|
INPUT NAME | You can create a name for the INPUT currently being used. | - | |
|
| Max: 8 characters, including Space, |
|
|
|
| |
CLOSED CAPTION | Activates closed captioning. | OFF | |
VIDEO1, VIDEO2, |
|
| |
|
|
| |
RESET | Resets the following settings within the OSD menu back to factory setting: | - | |
|
| MENU DISPLAY TIME, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY, |
|
|
| CLOSED CAPTION. |
|
|
|
|
|
MULTI DISPLAY |
|
| |
CONTROL ID | Sets the monitor ID number from | 1 | |
|
| “AUTO ID”, monitor ID numbers are set automatically in all monitors which follow in the chain with |
|
|
|
| |
|
| NOTE: Group ID is made of multiple selections. |
|
|
|
| |
IR CONTROL | Selects the mode of the monitor for use with the | NORMAL | |
|
|
| |
|
|
|
|
| NORMAL | The monitor will be controlled normally using the remote controller. |
|
|
|
|
|
| PRIMARY | Choose “PRIMARY” for the fi rst monitor within an |
|
|
|
|
|
| SECONDARY | Choose “SECONDARY” for all subsequent monitors within an |
|
|
|
|
|
| LOCK | Prevents the monitor from being controlled by the wireless remote controller. To return to normal |
|
|
| operation, press the “DISPLAY” button on the remote controller for 5 seconds. |
|
|
|
|
|
TILE MATRIX | Allows one image to be expanded and displayed over multiple screens (up to 100) through a |
| |
|
| distribution amplifi er. |
|
|
| NOTE: Low resolution is not suitable for tiling to a large number of monitors. You can operate |
|
|
| without a distribution amplifi er at a lower number of screens. |
|
|
|
|
|
| H MONITORS | Number of monitors arranged horizontally. | 1 |
|
|
|
|
| V MONITORS | Number of monitors arranged vertically. | 1 |
|
|
|
|
| POSITION | Select which section of the tiled image to be displayed on the monitor. | 1 |
|
|
|
|
| TILE COMP | Turns the TILE COMP feature on. | NO |
|
|
|
|
| ENABLE | Enables Tile Matrix. | NO |
|
|
|
|
TILE MATRIX MEM | When “INPUT” is selected, TILE MATRIX setting is applied to each signal input. | COMMON | |
|
|
| |
POWER ON DELAY | Adjusts the delay time between being in “standby” mode and entering “power on” mode. | 0 Sec. | |
|
| “POWER ON DELAY” can be set between 0 and 50 seconds. |
|
|
|
| |
POWER INDICATOR | Turns ON or OFF the LED located at the front of the monitor. | ON | |
|
| If “OFF” is selected, LED will not light when the LCD monitor is in active mode. |
|
|
|
| |
EXTERNAL CONTROL |
|
| |
|
|
|
|
| CONTROL | Selects the control interface, | |
|
|
|
|
| LAN RESET | Resets the LAN settings. | - |
|
|
|
|
| ID=ALL REPLY | When controlling the monitor externally, select if the communication command, which specifi es | OFF |
|
| destination equipment ID (ALL or GROUP ID), is replying or not. When you need reply, please |
|
|
| select “ON”. |
|
|
| If you connect the multiple monitors that are |
|
|
| you need to select “OFF” from second monitor. |
|
|
|
|
|
| MAC ADDRESS | Displays the MAC ADDRESS. | - |
|
|
|
|