OVER SCAN | Some video formats may require different scanning modes in order to best display the image. | ON | ||
HDMI, DVD/HD, SCART, VIDEO1, VIDEO2, |
|
| ||
|
| |||
|
|
| Image size is larger than what can be displayed. The image edge will appear cropped. |
|
| ON |
| ||
|
|
| Approximately 95% of the image will be shown on the screen. |
|
|
|
|
|
|
| OFF | Image size stays within the display area. The whole image is displayed on the screen. |
| |
|
|
| NOTE: When you use a computer with HDMI out, please set “OFF”. |
|
|
|
|
|
|
OPTION SETTING | You can set this setting when option board accessory is connected to the monitor. | - | ||
|
|
| Please contact your supplier for detailed information about Option board slot accessories. |
|
|
|
|
|
|
| OPTION POWER | Allow the monitor to supply power to Option board slot during power save mode or standby | OFF | |
|
|
| mode. |
|
|
|
|
|
|
| AUDIO | The function is available for slot 2 type PC. Selects sound input signal. To activate DIGITAL, | ANALOG | |
|
|
| select OPTION(D) for input signal and OPTION for AUDIO INPUT. |
|
|
|
| NOTE: DIGITAL is activated only when OPTION(D) is selected for input signal and OPTION for |
|
|
|
| AUDIO INPUT. |
|
|
|
|
|
|
| INTERNAL PC | The function is available for slot 2 type PC. |
| |
|
|
|
|
|
|
| OFF WARNING | If OPTION POWER is OFF, a warning message appears when monitor power is turned off. | OFF |
|
|
| Note: Warning message does not appear when monitor power is turned off by OFF TIMER |
|
|
|
| setting or SCHEDULE setting. |
|
|
|
|
|
|
|
| AUTO OFF | Monitor power is automatically “OFF” when connected PC is OFF or the monitor is in power save | OFF |
|
|
| mode. |
|
|
|
|
|
|
|
| START UP PC | When ON is selected, connected PC | NO |
|
|
|
|
|
|
| FORCE QUIT | When ON is selected, it performs | NO |
|
|
|
| |
120Hz (not adjustable) |
| - | ||
|
|
| ||
TOUCH PANEL (not adjustable) |
| - | ||
|
|
| ||
RESET | Resets the following settings within the ADVANCED OPTION menu back to factory setting: | - | ||
|
|
| INPUT DETECT (except the priority of input signals), INPUT CHANGE, TERMINAL SETTING, |
|
|
|
| DEINTERLACE, COLOR SYSTEM, OVER SCAN, START UP PC in OPTION SETTING and |
|
|
|
| FORCE QUIT in OPTION SETTING. |
|
|
|
| ||
FACTORY RESET | Resets OSD options back to factory settings EXCEPT FOR: PICTURE MODE, VOLUME, | - | ||
|
|
| SCHEDULE SETTINGS, DATE & TIME, ASPECT in PIP, SUB INPUT in PIP, LANGUAGE, |
|
|
|
| LAN SETTING, TILE MATRIX MEM, OSD ROTATION, CHANGE SECURITY PASSWORD and |
|
|
|
| SECURITY. |
|
|
|
|
|
|
English