NEC V322AVT user manual Pip, Osd, English-22

	TIME	Confi gures the time for the real-time clock.	-
	DAYLIGHT SAVING	Confi gures daylight savings on or off.	OFF
RESET		Resets the following settings within the SCHEDULE menu back to factory setting: OFF TIMER,	-
		SCHEDULE SETTINGS.
PIP
KEEP PIP MODE		Allows the monitor to remain in “PIP” and “TEXT TICKER” mode after powering off.	OFF
		When Power is returned, PIP and TEXT TICKER appear without having to enter the OSD.
PIP MODE		Selects Picture-in-Picture mode.	OFF
	OFF	Normal mode.
	PIP	Picture in Picture mode.
	POP	Picture out Picture mode.
	PICTURE BY PICTURE- Picture by picture (split screen) mode, with keep aspect.
	ASPECT
	PICTURE BY PICTURE- Picture by picture (split screen) mode, with full screen.
	FULL
PIP SIZE		Selects the size of the sub-picture used in Picture-in-Picture (PIP) mode.	LARGE
	SMALL
	MIDDLE
	LARGE
PIP POSITION		Determines where the PIP appears on the screen.	X = 95, Y = 92
ASPECT		Selects sub picture aspect, [FULL], [NORMAL] and [WIDE]. See page 17.	FULL
TEXT TICKER			OFF
	MODE	Enables Text Ticker and allows you to set Horizontal or Vertical direction.
	POSITION	Selects the location of the Text Ticker on the screen.
	SIZE	Determines the size of the Text Ticker in relationship to the overall screen size.
	BLEND	Sets the transparency of the Text Ticker (0: transparent, 100: opaque).
	DETECT	Enables auto-detection of the Text Ticker.
	FADE IN	Enables fade-in of the text ticker.
SUB INPUT		Selects sub picture input signal.	Depends on
			signal input

RESET	Resets PIP options back to factory settings except ASPECT and SUB INPUT.	-
OSD
LANGUAGE	Select the language used by the OSD.	ENGLISH
ENGLISH		(Depends on
		destination)
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
SVENSKA
РУССКИЙ
MENU DISPLAY TIME	Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds.	30 Sec.
OSD POSITION	Determines the location where the OSD appears on the screen.	X = 128, Y = 225
UP
DOWN
LEFT
RIGHT

English-22