NEC V322AVT user manual Connection, English-30

Page 32

Controlling the LCD monitor via RS-232C Remote Control

This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.

NOTE: When you use this function, EXTERNAL CONTROL should be “RS-232C” (See page 23).

Functions that can be controlled by a personal computer are:

Power ON or OFF

Switching between input signals

Connection

LCD Monitor + PC

OUT

IN

PC

(Out)

MultiSync

RS-232C (IN)

RS-232C (OUT)

MultiSync

RS-232C (IN)

RS-232C (OUT)

RS-232C Cable

RS-232C Cable

MultiSync

NOTE: If your PC is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required. Contact your dealer for details.

Check the “ID=ALL REPLY” setting in “EXTERNAL CONTROL”.

*In order to function, the RS-232C OUT terminal can only be connected to another monitor of the same model. Do not connect to other types of equipment.

To control monitor or multiple monitors that are daisy-chained together please use the control command. Instructions for the control command can be found on the CD included with the display. The fi le is called “External_control.pdf”.

Multiple monitors that are daisy-chained have a limit to the conectable monitor.

1) Interface

PROTOCOL

RS-232C

BAUD RATE

9600 [bps]

DATA LENGTH

8 [bits]

PARITY BIT

NONE

STOP BIT

1 [bit]

FLOW CONTROL

NONE

This LCD monitor uses RXD, TXD and GND lines for RS-232C control.

The reverse type cable (null modem cable) (not include) should be used for RS-232C control.

English-30

Image 32
Contents MultiSync Index Advanced OptionEnglish-1 Canadian Department of Communications Compliance StatementFCC Information Important Information English-2Cleaning the LCD Panel Cleaning the CabinetRecommended Use ErgonomicsContents Installation Attaching Mounting Accessories Attach Mounting AccessoriesUsing Option Board Installing and removing optional table top standPrevent Tipping English-7Parts Name and Functions Control PanelTerminal Panel Wireless Remote Control Operating Range for the Remote Control Handling the remote controlSetup Determine the installation locationInstall the remote control batteries Connect the supplied power cordSwitch on the power of all the attached external equipment Adjust the soundAdjust the screen See pages 20 Adjust the image SeeWiring Diagram ConnectionsBefore making connections English-14Connecting a Personal Computer Connecting a DVD Player or Computer with Hdmi outConnecting a Computer with DisplayPort English-15Power on and OFF Modes Basic OperationEnglish-16 OFFPower Indicator Using Power ManagementSelecting a video source Picture AspectPicture Mode Ambient ModeAmbient parameter setting Information OSDOSD On-Screen-Display Controls English-19English-20 AdjustPicture English-21 AudioSchedule English-22 PIPOSD Multi Display English-23Display Protection English-24Advanced Option English-25English-26 English-27 Image Sticking of LCD PanelRecommendations Remote Control Function English-28English-29 OUTConnection English-30Function Monitor ID = Code Data English-31Connecting to a Network Network Setting by Using an Http BrowserControlling the LCD monitor via LAN Control OverviewNetwork Settings Preparation Before UseHandling of the Address for Operation via a Browser English-33Alert Mail Setting English-34Alert error message list English-35OSD Display PROTECTION-FAN CONTROL-COOLING FAN = AutoFeatures English-36Troubleshooting English-37English-38 SpecificationsProduct Specifications Pin Assignment English-39Manufacturer’s Recycling and Energy Information Disposing of your old NEC productEnergy Saving Weee Mark European Directive 2002/96/EC