Using the Multi-media Functions

Your personal computer must have a voice input / output function.

Always use the accessory cable provided.

Using the Speakers

Prepare the speaker cable (accessory) and connect as shown in the illustration below.

Connect the cable to the AUDIO IN terminal on the back panel of the main unit.

■To an IBM PC or Compatible

Connect the speaker cable to the

AUDIO OUT terminal of the computer.

■To a Macintosh

Connect the speaker cable to the

SPEAKER terminal of the computer.

*The shape of the terminal of your computer may differ from that shown here. In such case, read the instruction manual for your computer and connect as indicated.

*Lower the volume if howling occurs.

Using Headphones

Prepare the headphones (commercially available) and connect as shown in the illustration below.

Connect the cable from the headphones.

Note:

•If a filter or touch panel is attached to the screen, blocking the speakers, the sound quality and volume will be affected.

•Volume will vary depending on the headphones and microphone being used, so set the volume as appropriate.

•Interference may occur if the micro-cable and speaker cable are positioned close to the display monitor. If noise occurs in the speakers or headphones, move the cables away from the monitor.

I - 8