NEC 42XC10 Using the Remote, Install the remote control batteries, Handling the Remote Control

Page 11

Installation - continued

Using the Remote:

Install the remote control batteries.

The remote control is powered by AA batteries. To install or replace batteries:

A.Press and slide to open the cover.

B.Align the batteries according to the (+) and (–) indications inside the case.

C.Replace the cover.

CAUTION: Incorrect usage of batteries can result in leaks or bursting. NEC recommends the following battery use:

Place “AA” size batteries matching the (+) and (-) signs on each battery to the (+) and (-) signs of the battery compartment.

Operating Range for the Remote Control

Point the top of the remote control toward the monitor’s remote sensor while pressing buttons. The remote control can be used from the front of the monitor at a maximum distance of 7 m/23 ft. from the front of the Plasma monitor’s remote control sensor. The maximum horizontal and vertical angle for use of the remote is 30 degree within a distance of 3.5 m/11.5 ft.

CAUTION

The remote control may not function when direct sunlight or strong illumination strikes the remote control sensor of the Plasma monitor, or when there is an object in the path of the sensor.

Handling the Remote Control

Do not open the remote control other than to install batteries. Do not allow water or other liquid to splash onto the remote control. If the remote control gets wet, wipe it dry immediately.

Avoid exposure to heat and steam.

Do not mix battery brands.

Do not combine new and old batteries, or mix brands. This can shorten battery life or cause liquid leakage of batteries.

Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

Do not touch exposed battery acid, it may injure skin.

Do not drop or mishandle the remote.

Do not get the remote control wet. If the remote does get wet, wipe dry immediately.

Avoid excessive heat and humidity.

Do not dispose of batteries in fire.

Please follow government regulations or public environmental rules that apply in your country/area when disposing of used batteries.

When replacing, use only conventional non- rechargeable alkaline or manganese batteries.

There is a risk of explosion if batteries are replaced incorrectly.

NOTE: If you do not intend to use the Remote Control for a long period of time, remove the batteries.

30 30

English-8

Downloaded From TV-Manual.com Manuals

Image 11
Contents English Package Contents Table of Contents English-1 Important Safety InstructionsEnglish-2 Important InformationCanadian Department Communications Compliance Statement FCC InformationEnglish-3 Safety Precautions and MaintenanceEnglish-4 Recommended UseEnglish-5 Recommended UseRecommended by the manufacturer InstallationUsing Optional Stand/Mounts Mounting LocationOrientation MaintenancePlease note the following when mounting on wall or ceiling Mounting on CeilingHandling the Remote Control Using the RemoteInstall the remote control batteries Operating Range for the Remote ControlPart Names and Functions English-10 DVIVGA Mini D-Sub 15 pin Analog computer input Video in Input S-video VIDEO1Menu Power ON/STANDBY Switches the power on/standbySleep Sleep timer RGBEnglish-12 Main Power Switch CoverMain Power Switch Cover To turn the unit on and OFFEnglish-13 Remote Control ID FunctionOn-Screen Display OSD Using the OSDYES English-15Position English-16English-17 On-Screen Display OSD351 Picture Size Using Video SignalsOperation NormalEnglish-19 Picture Size Using Computer SignalsNormal 43 or Sxga English-20 Split Screen ModeSide by Side Mode PictureEnglish-21 Picture-in-Picture ModeDisplaying Input Signal Adjusting the OSD controlsEnglish-22 Picture Settings MenuFunctions that can be controlled via RS-232C Set Monitor ID and RS-232C Control modeRS-232C Monitor ID and RS-232C ControlEnglish-24 Control command diagramInterface Following control sequence is used for a single monitorEnglish-25 Operation commandsControl sequence English-26 Read commandEnglish-27 TroubleshootingEnglish-28 Specifications 42XC10English-29 Specifications 50XC10English-30 Specifications 60XC10Analog Digital English-31English-32 42XC10 Supported Resolutions VideoEnglish-33 50XC10 Supported Resolutions PCEnglish-34 50XC10 Supported Resolutions VideoEnglish-35 Supported Resolutions PC 60XC10English-36 60XC10 Supported Resolutions VideoEnglish-37 Pin AssignmentAnalog RGB Input Mini D-SUB 15P VGA RS-232C Input SUB 9P Digital RGB Input DVI-D DVIDeclaration of the Manufacturer Weee Mark European Directive 2002/96/EC
Related manuals
Manual 41 pages 6.17 Kb Manual 41 pages 40.88 Kb

42XC10, 60XC10, 50XC10 specifications

The NEC 50XC10, 42XC10, and 60XC10 are notable models in NEC's line of high-quality LCD televisions that cater to the home entertainment market. These models are renowned for their innovative features and advanced technologies, ensuring exceptional viewing experiences for consumers.

One of the primary features across these models is the incorporation of NEC's superior LCD technology. The display panels utilize advanced backlighting technologies, which enhance brightness and color accuracy, providing a more vibrant and immersive viewing experience. The high resolution offered by these models ensures sharp images and clarity, making them ideal for high-definition content.

In terms of design, the NEC 50XC10, 42XC10, and 60XC10 boast sleek and modern aesthetics that fit seamlessly into any living space. The slim bezels and understated profiles allow for a more expansive viewing area, maximizing screen real estate while minimizing distractions from the surrounding environment. This design philosophy not only enhances the visual appeal but also encourages easy integration with various home décor styles.

Connectivity is another strong point for these television models. They come equipped with multiple HDMI ports, USB inputs, and integrated Wi-Fi capabilities, making it simple to connect to external devices such as gaming consoles, Blu-ray players, and streaming devices. This versatility allows users to easily switch between various media sources, enhancing the overall user experience.

Furthermore, the NEC 50XC10, 42XC10, and 60XC10 often incorporate smart capabilities, enabling access to various streaming services and applications directly from the television. This feature caters to the growing demand for on-demand content consumption and allows users to streamline their viewing habits in a user-friendly manner.

Enhanced audio technologies are also a significant characteristic of these models. They typically feature built-in speakers that deliver rich, immersive sound, complementing the high-quality visuals. Some models may even support surround sound technologies, providing a theater-like experience in the comfort of one’s own home.

In conclusion, the NEC 50XC10, 42XC10, and 60XC10 demonstrate a solid combination of cutting-edge display technologies, modern design, connectivity options, and smart features, making them compelling choices for consumers looking to elevate their home entertainment setups. These models are a testament to NEC's commitment to delivering quality and innovation in the competitive television market.