NEC 50XC10, 60XC10, 42XC10 user manual Installation, Using Optional Stand/Mounts, Mounting Location

Page 9

Installation

Using Optional Stand/Mounts

An optional stand or mounting apparatus can be installed either while the unit is in the upright position or while the unit is face-down.

To install the stand while in the upright position, lower the monitor onto to the feet as shown (Figure 1). Use the handles to support the display while lowering the support holes underneath the display onto the feet.

If stand or mounting apparatus is to be installed while the unit is face-down (Figure 2), be sure to lay the protective sheet (the foam sheet that the unit was wrapped in) underneath the unit on order to prevent damage to the screen.

This unit must be used with a stand or some type of mounting apparatus. This unit is not designed for use without additional support.

•For correct Installation and Mounting it is recommended to use a trained, authorized dealer.

•Failure to follow correct mounting procedures could result in dame to the unit or to the installer.

•Product warranty does not cover damage caused by improper installation.

•Allow adequate ventilation or provide air conditioning around the monitor, so that heat can properly dissipate away from the unit and mounting apparatus.

Figure 1

Protective Sheet

Figure 2

CAUTION:

•To install, follow those instructions included with the stand or mounting apparatus. Use only those devices

recommended by the manufacturer.

Table

 

•Make sure to install stand or mounting apparatus to the unit while on a surface that is strong and stable enough to support the weight of the unit, such as a floor or sturdy table.

•Use the specified clasps for installation.

•Take necessary steps to prevent the unit from tipping or falling.

Mounting Location

The ceiling and wall must be strong enough to support the monitor and mounting accessories.

•DO NOT install in locations where a door or gate can hit the unit.

•DO NOT install in areas where the unit will be subjected to strong vibrations and dust.

•DO NOT install near where the main power supply enters the building.

•DO NOT install in where people can easily grab and hang onto the unit or the mounting apparatus.

•When mounting in an enclosure or in a recessed area, as in a wall, leave at least 2 inches (50mm) of space between the monitor and the wall for proper ventilation (Figure 3).

Figure 3

 

50mm (2")

 

50mm (2")

50mm (2")

50mm (2")

 

50mm (2")

 

English-6

 

 

Downloaded From TV-Manual.com Manuals

Page 8 Page 10
Image 9
Page 8 Page 10
Contents English Package Contents Table of Contents English-1 Important Safety InstructionsCanadian Department Communications Compliance Statement Important InformationFCC Information English-2English-3 Safety Precautions and MaintenanceEnglish-4 Recommended UseEnglish-5 Recommended UseUsing Optional Stand/Mounts InstallationMounting Location Recommended by the manufacturerPlease note the following when mounting on wall or ceiling MaintenanceMounting on Ceiling OrientationInstall the remote control batteries Using the RemoteOperating Range for the Remote Control Handling the Remote ControlPart Names and Functions VGA Mini D-Sub 15 pin Analog computer input DVIVideo in Input S-video VIDEO1 English-10Sleep Sleep timer Power ON/STANDBY Switches the power on/standbyRGB MenuMain Power Switch Cover Main Power Switch CoverTo turn the unit on and OFF English-12English-13 Remote Control ID FunctionOn-Screen Display OSD Using the OSDYES English-15Position English-16English-17 On-Screen Display OSDOperation Picture Size Using Video SignalsNormal 351Picture Size Using Computer Signals Normal 43 or SxgaEnglish-19 Side by Side Mode Split Screen ModePicture English-20Displaying Input Signal Picture-in-Picture ModeAdjusting the OSD controls English-21English-22 Picture Settings MenuRS-232C Set Monitor ID and RS-232C Control modeMonitor ID and RS-232C Control Functions that can be controlled via RS-232CInterface Control command diagramFollowing control sequence is used for a single monitor English-24Operation commands Control sequenceEnglish-25 English-26 Read commandEnglish-27 TroubleshootingEnglish-28 Specifications 42XC10English-29 Specifications 50XC10English-30 Specifications 60XC10Analog Digital English-31English-32 42XC10 Supported Resolutions VideoEnglish-33 50XC10 Supported Resolutions PCEnglish-34 50XC10 Supported Resolutions VideoEnglish-35 Supported Resolutions PC 60XC10English-36 60XC10 Supported Resolutions VideoAnalog RGB Input Mini D-SUB 15P VGA RS-232C Input SUB 9P Pin AssignmentDigital RGB Input DVI-D DVI English-37Declaration of the Manufacturer Weee Mark European Directive 2002/96/EC
Related manuals
Manual 41 pages 6.17 Kb Manual 41 pages 40.88 Kb

42XC10, 60XC10, 50XC10 specifications

The NEC 50XC10, 42XC10, and 60XC10 are notable models in NEC's line of high-quality LCD televisions that cater to the home entertainment market. These models are renowned for their innovative features and advanced technologies, ensuring exceptional viewing experiences for consumers.

One of the primary features across these models is the incorporation of NEC's superior LCD technology. The display panels utilize advanced backlighting technologies, which enhance brightness and color accuracy, providing a more vibrant and immersive viewing experience. The high resolution offered by these models ensures sharp images and clarity, making them ideal for high-definition content.

In terms of design, the NEC 50XC10, 42XC10, and 60XC10 boast sleek and modern aesthetics that fit seamlessly into any living space. The slim bezels and understated profiles allow for a more expansive viewing area, maximizing screen real estate while minimizing distractions from the surrounding environment. This design philosophy not only enhances the visual appeal but also encourages easy integration with various home décor styles.

Connectivity is another strong point for these television models. They come equipped with multiple HDMI ports, USB inputs, and integrated Wi-Fi capabilities, making it simple to connect to external devices such as gaming consoles, Blu-ray players, and streaming devices. This versatility allows users to easily switch between various media sources, enhancing the overall user experience.

Furthermore, the NEC 50XC10, 42XC10, and 60XC10 often incorporate smart capabilities, enabling access to various streaming services and applications directly from the television. This feature caters to the growing demand for on-demand content consumption and allows users to streamline their viewing habits in a user-friendly manner.

Enhanced audio technologies are also a significant characteristic of these models. They typically feature built-in speakers that deliver rich, immersive sound, complementing the high-quality visuals. Some models may even support surround sound technologies, providing a theater-like experience in the comfort of one’s own home.

In conclusion, the NEC 50XC10, 42XC10, and 60XC10 demonstrate a solid combination of cutting-edge display technologies, modern design, connectivity options, and smart features, making them compelling choices for consumers looking to elevate their home entertainment setups. These models are a testament to NEC's commitment to delivering quality and innovation in the competitive television market.
Top Page Image Contents