NEC 50XC10, 60XC10, 42XC10 user manual Troubleshooting, English-27

Page 30

Troubleshooting

No picture

•The signal cable should be properly connected to the display card/computer.

•The display card should be properly seated in its slot.

•Front Power Switch and computer power switch should be in the ON position.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

•Check the monitor and your display card with respect to compatibility and recommended settings.

•Check the signal cable connector for bent or pushed-in pins.

Power Button does not respond

•Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.

Display image is not sized properly

•Use the OSD screen controls to increase or decrease the clock total.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

Selected resolution is not displayed properly

•Use OSD information to enter Information menu and confirm that the appropriate resolution has been selected. If not, select appropriate resolution.

No Sound

•Check to see if speaker cable is properly connected.

•Check to see if mute is activated.

•Check to see if volume is set at minimum.

NOTE: It is possible to play audio from a source that is different

English

Image persistence

•Please be aware that Plasma Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, Plasma monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

from the video source.

RS-232C does not work

• Check the PROTOCOL SET in the FUNCTION menu.

Remote Control does not work

•Make sure the batteries are inserted properly.

•Test the batteries for strength/life.

•Make sure to point the remote directly at the sensor on the monitor.

•Check if the remote is in Remote ID mode.

•The remote control may not function when in direct sunlight or when there is strong illumination on the remote sensor of the monitor.

Image is unstable, unfocused or swimming is apparent

•Signal cable should be properly attached to the Plasma monitor, computer, or other input device.

•Use the OSD screen controls to focus and adjust display by increasing or decreasing the clock phase total. When the display mode is changed, the OSD Image Adjust settings may need to be readjusted.

•Check the monitor and your display card with respect to compatibility and recommended signal timings.

Image of component signal is greenish

• Check to see if the DVD/HD input connector is selected.

LED on monitor is not lit

(no green or red color can be seen)

•Main Power Switch should be in the ON position and power cord should be connected.

Red LED on monitor is blinking

•A certain failure might have occurred, please contact your nearest authorized NEC DISPLAY SOLUTIONS service facility.

English-27

Downloaded From TV-Manual.com Manuals

Page 29 Page 31
Image 30
Page 29 Page 31
Contents English Package Contents Table of Contents Important Safety Instructions English-1FCC Information Important InformationCanadian Department Communications Compliance Statement English-2Safety Precautions and Maintenance English-3Recommended Use English-4Recommended Use English-5Mounting Location InstallationUsing Optional Stand/Mounts Recommended by the manufacturerMounting on Ceiling MaintenancePlease note the following when mounting on wall or ceiling OrientationOperating Range for the Remote Control Using the RemoteInstall the remote control batteries Handling the Remote ControlPart Names and Functions Video in Input S-video VIDEO1 DVIVGA Mini D-Sub 15 pin Analog computer input English-10RGB Power ON/STANDBY Switches the power on/standbySleep Sleep timer MenuTo turn the unit on and OFF Main Power Switch CoverMain Power Switch Cover English-12Remote Control ID Function English-13Using the OSD On-Screen Display OSDEnglish-15 YESEnglish-16 PositionOn-Screen Display OSD English-17Normal Picture Size Using Video SignalsOperation 351Picture Size Using Computer Signals Normal 43 or SxgaEnglish-19 Picture Split Screen ModeSide by Side Mode English-20Adjusting the OSD controls Picture-in-Picture ModeDisplaying Input Signal English-21Picture Settings Menu English-22Monitor ID and RS-232C Control Set Monitor ID and RS-232C Control modeRS-232C Functions that can be controlled via RS-232CFollowing control sequence is used for a single monitor Control command diagramInterface English-24Operation commands Control sequenceEnglish-25 Read command English-26Troubleshooting English-27Specifications 42XC10 English-28Specifications 50XC10 English-29Specifications 60XC10 English-30English-31 Analog Digital42XC10 Supported Resolutions Video English-3250XC10 Supported Resolutions PC English-3350XC10 Supported Resolutions Video English-34Supported Resolutions PC 60XC10 English-3560XC10 Supported Resolutions Video English-36Digital RGB Input DVI-D DVI Pin AssignmentAnalog RGB Input Mini D-SUB 15P VGA RS-232C Input SUB 9P English-37Weee Mark European Directive 2002/96/EC Declaration of the Manufacturer
Related manuals
Manual 41 pages 6.17 Kb Manual 41 pages 40.88 Kb

42XC10, 60XC10, 50XC10 specifications

The NEC 50XC10, 42XC10, and 60XC10 are notable models in NEC's line of high-quality LCD televisions that cater to the home entertainment market. These models are renowned for their innovative features and advanced technologies, ensuring exceptional viewing experiences for consumers.

One of the primary features across these models is the incorporation of NEC's superior LCD technology. The display panels utilize advanced backlighting technologies, which enhance brightness and color accuracy, providing a more vibrant and immersive viewing experience. The high resolution offered by these models ensures sharp images and clarity, making them ideal for high-definition content.

In terms of design, the NEC 50XC10, 42XC10, and 60XC10 boast sleek and modern aesthetics that fit seamlessly into any living space. The slim bezels and understated profiles allow for a more expansive viewing area, maximizing screen real estate while minimizing distractions from the surrounding environment. This design philosophy not only enhances the visual appeal but also encourages easy integration with various home décor styles.

Connectivity is another strong point for these television models. They come equipped with multiple HDMI ports, USB inputs, and integrated Wi-Fi capabilities, making it simple to connect to external devices such as gaming consoles, Blu-ray players, and streaming devices. This versatility allows users to easily switch between various media sources, enhancing the overall user experience.

Furthermore, the NEC 50XC10, 42XC10, and 60XC10 often incorporate smart capabilities, enabling access to various streaming services and applications directly from the television. This feature caters to the growing demand for on-demand content consumption and allows users to streamline their viewing habits in a user-friendly manner.

Enhanced audio technologies are also a significant characteristic of these models. They typically feature built-in speakers that deliver rich, immersive sound, complementing the high-quality visuals. Some models may even support surround sound technologies, providing a theater-like experience in the comfort of one’s own home.

In conclusion, the NEC 50XC10, 42XC10, and 60XC10 demonstrate a solid combination of cutting-edge display technologies, modern design, connectivity options, and smart features, making them compelling choices for consumers looking to elevate their home entertainment setups. These models are a testament to NEC's commitment to delivering quality and innovation in the competitive television market.
Top Page Image Contents