NEC PF28WT100 instruction manual Program Selection from 0 to, Picture Control, Sleep Function

PROGRAM SELECTION (FROM 0 TO 99)

Direct selection

Use the remote control NUMBER 0….9 buttons (A3).

For two digits program numbers, enter the second digit within 2 seconds.

SOUND CONTROL

Volume adjustment

Use the remote control VOLUME UP (A20) / DOWN (A7) buttons or the TV set front panel VOLUME UP / DOWN buttons (B8).

Mute

Mute the sound by pressing the remote control SOUND MUTE button (A2).

Then, logo is displayed. The previous sound setting is returned after pressing the same button a second time.

If a sound related function is used (e.g. VOLUME, 3D) then the MUTE will also be cancelled.

Manufactured under license from Dolby Laboratories, "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

Up / Down selection

Use the remote control PROGRAM UP (A6) / DOWN (A21) buttons or the TV set front panel PROGRAM UP / DOWN buttons (B9).

Mono forcing, dual language

- If you are unable to get good sound quality for a program due to poor reception, you can force a change from stereo to mono transmission by pressing the remote control MODE button (A14). Then the program status display will indicate "MONO" with a icon.

-On the other hand, during a program with dual language transmission, the MODE button (A14) allows you to toggle between the first and second language. The program status display will indicate "DUAL 1" or "DUAL 2" (plus NICAM according to the received signal).

-To return to initial state, press again the MODE button (A14).

Sound effects

A SPATIAL sound effect is available, using the remote control 3D (A13) button.

The following display appears:

SPATIAL		Spatial sound effect
STEREO		Sound transmission mode
	18:20	Clock

To return to initial sound effect, press again the 3D (A13) button.

The following display appears:
		OFF	No sound effect
	STEREO		Sound transmission mode
		18:20	Clock

As an option, the sound effects PANORAMA and Dolby Virtual are available with the same button. For other adjustments such as BALANCE, EQUALIZER or AVL(option), use the SOUND menu (page11).

PICTURE CONTROL

You can select three pictures settings, by using the remote control NORMAL button (A17) :

-Normal I (standard hard picture)

-Normal II (standard soft picture)

- Favourite

For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE

REDUCTION, use the PICTURE menu.

If an NTSC signal is received, then the TINT adjustment will also be available.

01		ABC	01		ABC	01		ABC
NORMAL I				NORMAL II			FAVOURITE
	18:20				18:20			18:20

FREEZE picture

This TV scans at 100Hz. It has an additional FREEZE picture function that holds the current image on the screen (similar in effect to the “pause” function of a video player). To freeze the image at any time, just press on the yellow FREEZE button (A26). This function is available with any signal source (from aerial, video player, DVD).

The display will indicate that the FREEZE function is activated. A second press on the same button (A26), entry to the MAIN menu (A19), or change of program will cancel the FREEZE function.

PROGRAM STATUS	Channel number	01		ABC	Channel name
DISPLAY (Recall)			MONO		Sound transmission Mode:
	Clock			18:20	Displayed with forced icon( )
					only if forced to mono by

MODE button (A14)

Use the remote control RECALL button (A16) to display (for 4 seconds only) program status information. This display appears also after a program selection or after switching on the TV set.

SLEEP FUNCTION

The set will turn off (to stand-by mode) after a period of time that you can select. By repeated use of the remote control SLEEP button (A4), you can enter one of the following settings :

OFF > 20 min > 40 min > 60 min > 80 min > 100 min > 120 min > OFF

01	ABC
	STEREO	Remaining time (minutes)
	20	before TV set switches off

The SLEEP time remaining (before TV turn-off) can be seen again at any time by one touch on the remote control SLEEP button (A4).

A second touch (while the status display is active) will modify the SLEEP time remaining.

FORMAT SELECTION

AUTO setting :

If picture format signalling data is received, then the most appropriate ZOOM format will be automatically selected. In the absence of this data, the default ZOOM format will be selected(see page 13, ZOOM AUTO function under

FEATURES MENU).

Otherwise, the preferred mode of the user can be forced by repeated pressing of the remote control ZOOM button (A15):

The following picture formats are available:

AUTO> 4:3 > 14:9 > ZOOM 14:9 > ZOOM 16:9 > FULL SCREEN > PANORAMA >

FAVOURITE > AUTO.

FAVOURITE Format

This contains the users preferred format setting. In order to enter new settings, proceed as follows:

-Navigate the list of available formats with the ZOOM button (A15) until FAVOURITE is selected.

-While the selection FAVOURITE is active on the screen, the format can be manipulated by use of the CURSOR LEFT (A7), RIGHT (A20) buttons (to change the horizontal size) and the CURSOR UP (A6) or DOWN (A21) buttons (to change the vertical size).

-The controls CURSOR RIGHT (A20) and CURSOR UP (A6) increase the size.

-The controls CURSOR LEFT (A20) and CURSOR DOWN (A6) decrease the size.

-The new settings are automatically memorized in the FAVOURITE format.

If the OSD status display FAVOURITE is at any time lost (timeout is 3-4 seconds after any previous use of the CURSOR keys), then a single touch of the ZOOM button (A15) is necessary before adjustment can be resumed.

8

9