NEC NLT-26HD1, NLT-32HD1, NLT-42HD1 RGB-PC Menu, PC Setup, Wxga or VGA Only RGB/HDMI mode

PC Setup

You can adjust horizontal/vertical position, clock, phase, and auto-configure, reset as you prefer.

Press the MENU button and then D / E button to select the SETUP menu.

Press the G button and then D / E button to select the desired picture item.

Press the F / G button to make appropriate adjustments.

H-Position / V-Position

This function is to adjust picture to left/right and up/down as you prefer.

Clock

This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change.

Phase

This function allows you to remove any horizontal noise and clear or sharpen the image of characters.

Auto-configure

This function is for the automatic adjustment of the screen position, clock and phase.

The displayed image will disappear for a few seconds while the Auto-configuration is in progress.

Reset

This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.

Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor’s position, clock and phase manually.

Press the OK button to store it for the PC monitor picture. Press the EXIT button to return to PC mode.

RGB-PC Menu

EN

WXGA or VGA (Only RGB/HDMI mode)

-When the set is inputted DVI-480p signal in VGA mode, select 480p on the SETUP menu.

-When the set is inputted WXGA signal, select the desired WXGA resolution.

SETUP

Language

PC Control

WXGA

VGA

Input

ARC

Audio Mode

H-Pos.

V-Pos.

Clock

Phase

Auto

Reset

0

0

10

15

SETUP

Language

PC Control

WXGA

VGA

Input

ARC

Audio Mode

1024X768

1280X768

1360X768

1366X768

SETUP

Language

PC Control

WXGA

VGA

Input

ARC

Audio Mode

640X480

480P

()}{OOOKOOMENU ()}{OOOKOOMENU ()}{OOOKOOMENU

37