NEC NLT-42HD1, NLT-32HD1, NLT-26HD1 Connection to External, Antenna Connection, Watching VCR

equipment

-You can connect additional equipment, such as VCRs, camcorders etc. to your set. However please check with your manufacturers instruction books for specific information. Make sure all connections are made with both your set and additional appliance unplugged from the mains to avoid damaging your equipment.

Here shown may be somewhat different from your set.

Connection to External

1

Antenna Connection

-Be careful for the bronze wire not to be bender in connecting to antenna input port.

<Back panel of the set >

RF coaxial wire (75 ohms)

VHF antenna

UHF antenna

wall antenna socket outdoor antenna

Apartments	Private house
(connecting to wall antenna	(connecting to wall outdoor
socket)	antenna)

2

Watching VCR

< Back panel of the set >

S-VIDEO OUT
(R) AUDIO (L)	VIDEO

IN

<Back panel of VCR >

-If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input.

-To avoid picture noise (interference), leave an adequate distance between the VCR and set.

Use the INPUT SELECT button on the remote control to select AV1 or AV2.

(If connected to S-VIDEO, select the S-Videoexternal input source.)

Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner’s manual)

8