Moving the PIP
Press the PIP POSITION button.
Press the PIP POSITION button repeatedly until desired position is achieved. The sub pictures move clockwise.
Swapping the PIP
Press the SWAP button to exchange the main and sub pictures.
Main Picture |
| Sub Picture |
Programme selection for sub picture
Press the PIP PR +/- button. The selected programme number is displayed just below the programme number of main picture.
Selecting a Input Signal Source for the PIP
Use the PIP INPUT button to select the input source for the sub picture.
Programme scan
This function enables you to search all the stored stations on 4 or 16 sub pictures and see your favorite station by exchanging the main and sub pictures.
When main picture is TV, pressing SCAN will give POP 16. When main picture is other inputs, pressing SCAN will give POP4.
The selected sub or main pictures search all the stored stations.
Press the EXIT button to switch off sub or main pictures.
This function works in the following sub picture mode : TV, AV1, AV2,
PIP (Picture-In-Picture) Feature
EN
39