Using the Home Menu
From the Home Menu screen you can access all the Media for playback and recording of the recorder.
1.Press HOME to display the Home Menu screen.
2.Use the b / B buttons to select a main option you want. Sub options appears.
3.Use the v / V and ENTER buttons to select the sub option you want.
4.To exit the HOME menu, press HOME.
TV
TV HDD: Returns to live TV viewing for HDD recording.
TV DVD: Returns to live TV viewing for DVD recording.
MOVIE
HDD: Displays the Title List menu for HDD. (page 40)
HDD DivX: Displays the [Movie List] menu for HDD. (page 26)
DISC:
-Displays Title List menu for recordable disc (page 40)
-Displays [Movie List] menu for DivX disc. (page 26)
-Plays back Video CD or
PHOTO (See page 29)
HDD: Displays [Photo List] menu for HDD.
DISC: Displays [Photo List] menu for disc.
MUSIC (See page 27)
HDD: Displays [Music List] menu for HDD.
DISC: Displays [Music List] (or Audio CD) menu for disc.
SETUP (See page 14)
Start: Displays Setup menu.
Initial Settings
In this menu system, there are several ways to customize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings.
General Operation
1.Press SETUP and the Setup menu appears.
2.Use v / V to select the desired option.
3.While the desired item is selected, press B to move to the second level.
4.Use v / V to select the second desired option.
5.Press B to move to the third level.
6.Use v / V to select the desired setting then press ENTER to confirm your selection.
Some items require additional steps.
7.Press SETUP to exit the Setup menu.
Note:
Press b to go back to the previous level.
General Settings
Auto Programming
This recorder is equipped with a frequency synthesized tuner capable of receiving up to 88 TV channels.
Preparation:
Connect the recorder to the desired type of aerial, as shown in Connecting to the Aerial on page 10.
1.Select the [Auto Programming] option.
2.Press B to move to the third level. [Start] icon is highlighted.
3.Press ENTER to begin the channel search. The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory.
Note:
After you have connected your recorder for the very first time. If you press SETUP for initial setting, you can only set the [Auto Programming] option. Then you can set the other options.
14