Operation
8.Clicking 
on the left side closes the toolbar. If you want to display the toolbar again, position the mouse pointer at the bottom of the screen. Change the toolbar location by clicking the empty space on the left side of the toolbar and drag it to where you want it located on the screen. Use the arrow buttons on the toolbar to pan or tilt the camera in the direction you want. The other controls on the toolbar perform as described below:
Table | PTZ Controls |
Zoom In/Out
Focus Near/Far
Iris Open/Close
Set/Load Preset
Image Adjustment
Note It is important that cameras and monitors are correctly installed and adjusted prior to making any image adjustments using the DVR’s controls.
If a user who has Color Control authority logs in, the user can adjust the image. Pressing and holding a camera button for a few seconds displays an image adjustment dialog. You can control brightness, contrast, hue and saturation for each camera.
Note Any image adjustments you make will be applied to both the live video on the monitors and the recorded video.
Event Monitoring
When an event occurs, the DVR will display the camera associated with the event if Event Monitoring On is selected in the Display setup screen, OSD tab (see Display
Screen, page 66).
100