Operation
Active Cameo Mode
You can enter the Active Cameo mode by pressing 
in any
buttons moves the active cameo. Pressing 
while in the Active Cameo mode exits the Active Cameo mode. The active cameo mode will remain in effect for 15 seconds if there is no further operation.
In active cameo mode, press the button for the camera you want displayed as active cameo. After setting the camera number to active cameo, the DVR moves the active cameo to the next cameo. You can change the screen layout in this way.
PIP Mode
You can display a
Zoom Mode
You can enlarge an area of the video by pressing ZOOM. For a few seconds after pressing ZOOM, a PIP displays. Inside the PIP, a rectangle shows the area that is enlarged. You can move the rectangle around using the arrow buttons. While in the Zoom mode, you can enlarge the area more by pressing 
. The Zoom mode options are 2x, 3x and 4x. Exit Zoom mode by pressing ZOOM. While in Zoom mode, 
displays in
PTZ Mode
If a user who has PTZ Control authority logs into the system, the user can control PTZ cameras. The DVR will control cameras with Pan, Tilt and Zoom capabilities. Press PTZ to enter PTZ mode and press the button again to exit PTZ mode. You can control the camera using front panel control buttons, by setting up presets or by selecting the expanded PTZ features.
1.Select the PTZ camera you wish to control by selecting it from the menu. The icon
displays on the PTZ camera screen.
Document 900.0856 Rev B | 97 |
02/08 |
|