Honeywell HRXD9, HRXD16 manual Archive Screen, Archive Setup Screen

Configuration

When the DVR is in the Event Record mode it is possible to have it record images before the event occurs. The Pre-Eventscreen allows you to define how to handle pre-event recording.

2.You can turn individual cameras On or Off for pre-event recording. The image speed can be set from 0.10 to 30.00 ips (25.00 ips PAL), and image quality can be selectable from Very High, High, Standard and Low.

3.You can set the amount of time to record prior to the event by adjusting the Dwell. You can set the Dwell from 5 seconds to 30 minutes. The longer the dwell set, the fewer maximum ips can be set.

Note When the DVR is in the Time or Time & Event mode, it ignores

the pre-event settings and follows the time settings.

4.You can save your changes by highlighting Save and pressing . Selecting Cancel exits the screen without saving the changes.

Archive Screen

1.Highlight Archive in the Record menu and press , and the Archive setup screen (Figure 3-53) appears.

Figure 3-53 Archive Setup Screen

2.Highlight Archive On and press to toggle between On and Off.

Note If you have not set up a storage device for archiving, a message appears notifying you of this.

3.Select the Days and Time Range you want archived.

74