NEC GT1150 Undo, Info, Test, Help, Auto RGB only, Focus +, Magnify/Zoom +, Ctl, Remote Jack

Page 17

10. UNDO

Press to return the adjustments and settings to the previous condition. While pressing and holding CTL, pressing this button clears the entire menus or adjustment/setting screen. At this time the adjustments/set- tings are stored in memory except the items on the setting screen with "OK" and "Cancel" buttons such as the Menu and the Setup screen.

11. CANCEL

Press to exit the menu.

Press this button with CTL to return to the previous menu without clos- ing adjustment/setting screen while the menus appear. This feature allows you to adjust or set several items concurrently.

12. INFO

Displays the Information screen.

13. TEST

Press to display the test pattern. Pressing this button sequentially se- lects nine test patterns.

14. HELP

Provides online help.

15. PIXEL

Displays the Position/Clock screen to adjust the clock and phase.

16. AUTO (RGB only)

Press to adjust Position-H/V and Pixel Clock/Phase for an optimal pic- ture.

17. POSITION

Press to display the Position/Clock screen.

While pressing and holding CTL, pressing this button displays the Lens Shift adjustment screen.

18. MUTE SOUND

Turns off the sound for a short period of time. Press again to restore the sound.

19. MUTE OSD

Press to turn off the on-screen display. Press again to restore the on- screen display.

NOTE: You can also turn off the on-screen display forcefully by pressing and holding CTL and then pressing MUTE OSD (Forced On-Screen Mute Mode) ; doing this again restores it. In this case any adjustment will still change the projector's memory settings. This mode is available even when input is switched to another or the power is turned off the main power.

20. MUTE PICTURE

Press to turn off the picture for a short period of time. Press again to restore the picture.

21. KEYSTONE (R)

Press to display the Keystone Correction screen.

When the test pattern is displayed, while pressing and holding CTL, pressing this button displays a red test pattern.

22.AMPLITUDE (G)

Service personnel only.

When the test pattern is displayed, while pressing and holding CTL, pressing this button displays a green test pattern.

23.ENTRY LIST (B)

Press to display the Entry List screen.

When the test pattern is displayed, while pressing and holding CTL, pressing this button displays a blue test pattern.

24. FOCUS (+/–)

While pressing and holding CTL, pressing this button allows you to adjust the lens focus.

25.MAGNIFY/ZOOM (+/–)

Magnify the size of a target portion.

While pressing and holding CTL, pressing this button allows you to zoom the lens in and out.

26.CTL

Used in conjunction with other buttons, similar to a shift key on a com- puter.

27. Remote Jack

Connect your remote control cable here for wired operation.

28. Infrared Transmitter

Direct the remote control toward the remote sensor on the projector cabinet.

 

 

 

 

EJ

G

 

 

 

MN

 

 

TU

 

 

 

 

 

OR

 

 

 

2

 

 

 

 

 

 

IMAGE

P

.

BAL

DEF

 

 

4

S

 

 

 

 

 

 

JKL

 

 

 

 

 

 

 

 

 

WHITE

 

 

 

 

SS

 

D

 

 

 

 

 

ABC

1

 

 

E

 

 

 

 

 

ADJUST

PICTURE

 

 

 

 

R

 

 

 

 

 

 

 

MENU

 

D

A

 

 

 

 

 

 

 

 

 

 

 

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

-

 

 

 

 

 

 

 

 

POWER

 

 

 

 

 

 

BS

 

 

 

 

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

27

28

E – 9

Image 17
Contents GT1150 GT1150 Declaration of Conformity Important Information PrecautionsRF Interference DOC Compliance NoticeDOC avis de conformation Informations ImportantesPrécautions Installation Important SafeguardsPower Supply CleaningMesures de sécurité importantes Remplacement de la lampeAlimentation NettoyageTable of Contents User’s manuals IntroductionWhats in the Box? Lens hood Remote sensor Terminal panel Left Getting to Know Your GT1150 ProjectorControls PC Card slot Lens optionalRemote sensor Carrying handle Lamp cover Depression for foot 4 locationsRivet Carrying the ProjectorString Top Features Front Terminal Panel Right PC Card Viewer Front Terminal Panel LeftRemote Control Features Info UndoTest HelpOperating Range for Wireless Remote Control Remote Control PrecautionsRemote Control Battery Installation Remote cable supplied Terminal panel Left Using the Remote Control in Wired OperationScreen Size and Projection Distance InstallationSetting Up Your GT1150 Projector Lens Shift Adjustable Range Preparation Tools needed for installation Optional Lens InstallationBefore installation Lens hood Lens hood capLens mount Reinstall the lens hoodMaster projector Foot Depression for foot Slave projector Setting up for Double Stacking in Link ModeStacking the Projectors HookupProjector Orientation Link Mode SettingCeiling Front Projection Ceiling Rear ProjectionLect Desktop Rear. See page E-47 Desktop Rear ProjectionPower ON/STAND by button Connecting the Power Cable and Turn on the ProjectorIndicators Basic OperationMenu Language Select screen About Startup ScreenTo turn off the projector Test Set up the projectorUpDown Other adjustmentsConnecting Your VCR Or Laser Disc Player When used in standalone operationConnections VCR or other video equipment TV tuner DVD playerAudio equipment Connecting Your DVD Player with Component OutputRGB signal cable supplied Connecting Your PC Or Macintosh ComputerSupplied MacintoshConnecting a PC with DVI output Connecting an External MonitorDVI digital input accepts up to the XGA signal DVI cable not suppliedInformation for Reducing Radiation of Electromagnetic Waves Connecting to a Single WorkstationInstallation Instructions BNC 5 coaxial cable When Used with One Switcher ISS-6020/ISS-6020GISS-6020 To Rgbhv output To slot Personal computer To REMOTE1 To audio outputHow to make connections When Used with Two or More Switchers 100 InputsTo Remote To Remote To Slot Personal Computer SlaveSet the DIP switch S8601 of the Switcher as follows ISS-6020 Output to Setting of S8601Pin Configuration of Optional CTL-6010 Cable Remote 1 ConnectorWhen used with the Switcher Pin No External control mode OFF When used in stand alone operation Pin NoExternal control mode on Projector ID= Operating Multiple Projector with Remote ControlProjector ID= Connection for Double Stacking in Link Mode Using the PC Control connectorsConnect source equipment to the master projector Master projectorUsing the Magnifying Glass Icon Using the MenusOperation General ControlsCustomizing Basic/Custom Menu Default Basic/Custom Menu items areList of Direct Button Combinations DVI Analog Menu treeMenu Elements Entry Edit Command Expert mode only SwitcherMenu Descriptions & Functions Source SelectVolume not available for PC Card Viewer Prev Play Jump Setup View Next Stop Select DeletePC Card Viewer Picture not available for PC Card ViewerLamp Mode Color TemperatureImage Options KeystoneSwitcher Gain available only when used with ISS-6020 Color Matrix available for component video signal onlyResolution when Auto Adjust is off White Balance not available for PC Card ViewerProjector Options Menu Sleep TimerCommands Ume bar on screen Ing to use the volume barOn screen Keystone barGives normal Jpeg quality SetupClear Filter Usage Switcher Control Link Mode not available for DVI digitalCapture ToolsPC Card Files Changing Background LogoTest Pattern HelpInserting and Ejecting a PC Card Using the PC Card Viewer functionBefore Installing Installing the PC Card Viewer SoftwareInstallation Starting Up the PC Card Viewer Software on your PCProjecting slides Optional Presentation Remote ControlAuto Play Mode When the tool bar is not displayedSwitching to Slides Directly from Other Input Modes ExampleDeleting Captured Images Capturing Images Displayed on the ProjectorViewing Digital Images PreparationsUninstalling the software Uninstalling the PC Card Viewer SoftwareReplacing the Lamp MaintenanceTo replace the lamp InterlockTo replace the filter Cleaning or Replacing the FilterTo clean the filter Contact de sécurité Pour remplacer la lampePour nettoyer le filtre à air Nettoyage ou remplacement du filtrePour remplacer le filtre à air Aspirez le filtre à travers le couvercle de filtrePower/ Status Light Messages TroubleshootingCommon Problems & Solutions IndicatorSupplied software change the image to 1024 768 dots in size When using the PC Card Viewer functionModel Number GT1150 SpecificationsOptical ElectricalMechanical Optional Accessories Cabinet DimensionsLens center Unit = inch mmSub Pin Assignments Mini D-Sub 15 Pin Connector RGB2RGB Signal Analog YCbCr Signal Video / S-Video Volume List of Menu Items Available in Link ModeTiming Chart Cable Connection PC Control CodesGravity Stack Function7N8P0112
Related manuals
Manual 75 pages 12.39 Kb

GT1150 specifications

The NEC GT1150 is a high-performance projector designed to meet the demands of various applications in educational, business, and professional environments. Equipped with advanced technologies, it offers exceptional image quality and versatility, making it an ideal choice for presentations and multimedia displays.

One of the standout features of the NEC GT1150 is its brightness. With a remarkable output of 5,000 ANSI lumens, the projector delivers vibrant images even in well-lit rooms. This high brightness level ensures that presentations can be seen clearly in various lighting conditions, lending itself to classrooms, conference rooms, and auditoriums alike.

The resolution of the GT1150 is another key aspect. It supports XGA (1024 x 768), which provides a sharp and detailed image, crucial for displaying text-heavy presentations or intricate visuals. The projector’s contrast ratio enhances this experience, offering deep blacks and bright whites, thus elevating the overall viewing experience for audiences.

In terms of connectivity, the NEC GT1150 is equipped with multiple input options. It includes VGA, composite, and S-Video connections, enabling users to connect a variety of devices such as laptops, document cameras, and DVD players seamlessly. Additionally, the projector features a built-in 10-watt speaker, providing adequate sound output for most presentation settings.

Another interesting characteristic of the GT1150 is its portability. Weighing approximately 7.5 pounds, it is designed with ease of transport in mind, allowing users to set it up quickly in different locations. This mobility makes it a preferred choice for educators and business professionals who need to move between multiple venues regularly.

The GT1150 is also designed with user convenience in mind. It features an intuitive on-screen menu, providing easy access to a range of functions including picture adjustments, source selection, and setup options. This user-friendly interface contributes to a smoother operation, allowing presenters to focus on their content rather than technical difficulties.

Moreover, the NEC GT1150 is built to last, with an expected lamp life of up to 4,000 hours in normal mode, which can stretch to 5,000 hours in eco mode. This longevity reduces maintenance costs and minimizes downtime due to lamp replacements.

In summary, the NEC GT1150 is a versatile and robust projector that excels in delivering high-quality images, a variety of connectivity options, and user-friendly features, making it an excellent choice for a wide array of presentations and multimedia applications. Whether in the classroom or a corporate setting, the GT1150 helps ensure that your content is delivered effectively and efficiently.