The DVR Setup Menu
Installation: The
1.Connect your cable TV or antenna to the TUNER input jack found on the back of the DVD player. (See page 14)
2.Make the appropriate Audio/Video connections (see pages
3.Plug in your
Initial Configuration
1.Turn on the TV.
2.Press the POWER button on the remote to turn on the
to call up the Menu. Use the (direction buttons) to select the desired option, then press
ENTER.
Figure 1. The menu
Note: During DVD playback, if you want to watch TV, please highlight the Watch TV, and press
ENTER.
During MP3 or CD playback, if you want to watch TV, please open the disc tray and take out the disc first.
1.After you’ve selected the setup menu, return to the Recording Setup menu and select the Channel Setup function. Select Auto CH Scan option and press the Enter button on the remote control so that the
Figure 2. The Channel Setup Options
2.When the Auto CH Scan function is selected, the
3.After the
4.Select the Channel List function to display the complete list of all the channels that were found during the
5.Press the SETUP button on the remote to exit and save the selection.
- 3 -