The DVR Setup Menu
Audio Setup
1.The Audio Setup menu is directly below the Dolby menu. Press ENTER to access the Audio Setup menu.
The Audio Setup menu allows you to access the Digital Out, Dynamic Compress, and ProLogic functions.
Digital Out function: In DVD playback mode, Digital Out refers to bypassing the recorder system’s internal DACS and instead feeding the digital audio signal to an external receiver for better sound quality.
The three outputs are:
Analog: normal playback.
External Decode: Audio not decoded by recorder system so this output is appropriate for an external decoder/receiver with higher performance standards.
Internal Decode: Audio decoded by recorder system and digital signal fed to the outside of the box perhaps to be fed into an external receiver with better DACS then this recorder system.
2.Press the SETUP button on the remote to exit and save the selection.
Dynamic Compression Setup
Dynamic Compression functions: A FULL to OFF sliding control for dynamic range allows you to turn down the level of loud passages (explosions, car crashes and the like), while at the same time keeping soft passages loud enough to clearly hear them. The setting is expressed as a fraction of the full dynamic range.
When set to FULL, the range between loudest and softest is compressed to the maximum during playback.
When set to OFF no compression occurs during playback.
3.Press the SETUP button on the remote to exit and save the selection.
Dolby ProLogic Setup
The Dolby ProLogic feature is a Dolby surround sound audio format that can enhance standard
1.Use the arrow keys on the remote to select the ProLogic function, and to turn the function on and off.
ON: When set to ON,
OFF: When OFF, the
Auto: When the
2.Press the SETUP button on the remote to exit and save the selection.
- 3 -