DVD+RW/DVD+R Disk Recording
Starting The Recording Session
1.The quality of the recording to a DVD+RW/+R disc directly depends on the selection of the recording mode. Decide on the quality of the recording you want, taking into account the amount of the playback time each recording mode requires.
Selecting Best, for example, means only one
2.To begin the recording setup, use the arrow keys on the remote to call up the Recording Setup menu from the main Setup menu, as shown here. The Recording Setup menu is comprised of the Recording Quality, Auto Chapter, Set Clock, and Channel Select functions.
3.You can also determine how much time should be allotted to every chapter of your recording, if desired. These chapters can then be navigated through at playback time by using the arrow keys on the remote control. Press Enter to make the auto chapter selection, as shown here.
4.Press the SETUP button on the remote to exit and save the selection.
Recording Modes
The
•Quick Record allows you to perform a simplified unattended timer recording.
•My Record List allows you to view all the recordings that will be made onto the disk.
Note: Most prerecorded videocassettes and DVDs are copy protected. If you try to copy them with the DVD recorder, the Recorder display may show “COPY PROTECT”.
Figure 8. The Record Program Menu
One Touch Recording
1.From the Menu, select the Watch TV function. A TV program appears on the TV screen.
2.Press the arrow keys on the remote to move through your favorite channel selections. Each channel will appear on your TV screen as you use the tuner on the DVD Recorder to find the channel you want.
3.Press the RECORD button on the remote control to start recording the program on the TV screen. The message “RECORDING” and a timer counter are superimposed on the TV screen.
4.Press the STOP button to end the recording session. The message “CLOSING” appears on the screen, informing you the recording session is ending. Wait a minute or so for active the disc title to return to your TV screen.
- 4 -