0348E3.fm Page 16 Tuesday, April 25, 2000 4:15 PM
Programming the Remote
DVD/VCR Functions
This remote is designed to operate different brands of DVD players and VCRs. You must first program the remote to match the remote system of your DVD or VCR.
Procedure
1.Turn ON your DVD or VCR.
2.Aim the remote control at the front of your DVD or VCR.
3.While holding down the DVD/VCR button on the remote, enter the
4.The remote will now control your DVD or VCR.
Cable/Satellite Box Functions
This remote is designed to operate different brands of cable boxes and Satellite boxes. You must first program the remote to match the remote system in your cable/satellite box.
Procedure
1.Turn ON your cable/satellite box.
2.Aim the remote control at the front of your cable/ satellite box.
3.While holding down the CABLE button on the remote, enter the 2 digit preset code (See “Component Codes” on page 17) that matches your cable/satellite box. The remote will turn off your cable/satellite box when the correct 2 digit code is entered. When this occurs, the remote control is programmed for your cable/satellite box. If the cable/satellite box does not turn off after 5 seconds, try another 2 digit preset code, if available.
Notes
•If your DVD or VCR will not operate remotely after performing the above procedures, this means that your equipment’s code has not been coded into the remote. Please consult your equipment’s operating guide.
•The remote control will remember the codes you have programmed in until the batteries are removed from the remote control. After replacing the batteries repeat the programming procedure stated above.
•If your VCR does not have a remote power function, the remote will issue the CHANNEL UP function.
•The MENU button will act as the VCR MENU button for HITACHI VCRs.
•The INPUT button will act as your VCR +100 button, if required.
4.The remote will now control your cable/satellite box.
Notes
•If your cable/satellite box will not operate remotely after performing the above procedures, this means that your cable/ satellite box code has not been coded into the remote. Please consult your cable/satellite box operating guide.
•The remote control will remember the codes you have programmed in until the batteries are removed from the remote control. After replacing the batteries, repeat the entire programming procedure stated above.
•If your cable/satellite box does not have a remote power function, the remote will issue the CHANNEL UP function.
Write the code numbers from tables in this space. This will serve as a reference if you need to program your remote control.
CABLE/SATELLITE BOX
DVD
VCR
- 16 -