0348E3.fm Page 8 Tuesday, April 25, 2000 4:15 PM
Picture in Picture (PIP) Operation
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at the same time with or without an external video source (VCR).
Without a VCR
Procedure
•Connect incoming cable to antenna (ANT) input on back of TV.
•Press the PIP button on the remote control to display the PIP frame.
• Choose channels for the PIP frame by pressing the remote control PIP CH buttons.
•Choose channels for the Main Picture by pressing the remote control CH buttons or by using the numeric keypad.
Note: The audio is from the Main Picture only.
With a VCR and Cable Box
Connect your television to a VCR and cable box, as shown.
ANT |
TERMINALS ON BACK OF TV | VCR | CABLE BOX | ||||||
|
|
|
|
|
| |||
TO AUDIO | COMPONENT | R | AUDIO | L |
|
|
|
|
VIDEO INPUT |
|
|
|
|
|
|
| |
AMP |
| PR | PB |
| Y/VIDEO | ANT INPUT | ANT OUTPUT | |
|
|
|
| |||||
| INPUT 1 |
|
|
|
|
|
|
|
L |
|
|
|
| VIDEO OUT |
|
| |
|
|
|
|
|
|
|
| |
R |
| R | AUDIO | L | VIDEO |
|
|
|
| INPUT 2 | L |
| ANT INPUT | ||||
|
|
|
|
|
| |||
|
|
|
|
|
| AUDIO OUT | OUTPUT |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| R |
|
|
Cable splitter
Cable splitter not supplied
(Not supplied)
CABLES NOT SUPPLIED Incoming cable
Note: The Remote Control must be programmed with supplied codes to operate the VCR and cable box. (See “Programming the Remote” on page 16.)
Procedure
Press the PIP button on the remote control to display the PIP frame.
To view scrambled channels through your cable box in the PIP frame:
•Press the INPUT button on the remote control to select the video input to which your VCR is connected.
•Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3 or 4.
•Choose channels for the PIP frame by pressing the CABLE button on the remote control and using the
numeric keypad or CH buttons.
•Choose channels for the Main Picture by pressing the TV button on the remote control and using the numeric
keypad or CH buttons.
Note: The audio is from the Main Picture only.
SWAP and RECALL Buttons
The SWAP button switches the PIP and the main picture source. The RECALL button shows the status of the onscreen PIP and the main picture.
- 8 -