Troubleshooting
Symptom | What to check | |
No TFT LCD display | Make sure the power is on. | |
|
| |
LCD is very bright or dark. | Use the BRIGHT +/- on the control panel to | |
adjust the brightness. | ||
| ||
Colors of picture are faded or | Use the COLOR +/- on the control panel to | |
bloomy. | adjust the color. | |
| Make sure a disc is loaded. | |
| Make sure the disc isn’t loaded upside down. | |
| Disc should be clean, not dirty or warped. | |
The player does not play discs | Player’s region code should be the same as | |
or the display shows: no disc. | region code of DVD disc. | |
| Has water condensation occurred? | |
| If it has, remove the disc. Keep the disc and | |
| the player powered up for about one hour. | |
| Make sure the volume is not set to minimum. | |
No sound. | Make sure the headphone is not connected. | |
| Make sure the player is not in pause status. | |
| Make sure the player is not in | |
Disc skips and will not continue | Is the disc dirty or warped? | |
to play. | If so, clean disc or press the GOTO button to | |
| skip to next chapter. | |
| Make sure there aren’t any obstructions | |
| between the remote and the player. | |
The remote control does not | Make sure you are pointing the remote control at | |
work. | the player. | |
| Make sure batteries are inserted correctly. | |
| Replace weak batteries. |
Other possibilities:
Static or other external interference may cause the player to function abnormally. In this circumstance unplug the
39