Polaroid DVP 300 operation manual Troubleshooting, Symptom Check Item, Others

￿

Troubleshooting

SYMPTOM

CHECK ITEM

				-If disc is loaded in.
				-If disc is loaded upside down.
				-If disc is dirty or warped.
The player will not play				-If the players region code is the same as the
or displays “NO DISC”.				region code of DVD disc.
				-If water condensation has occurred.
				-If it occurs, take out disc and leave the
				player on for at least one hour.
				-If system connection is correct.
				-If the power to speakers is turned on.
There is no sound.				-If the sound setup of DVD disc is correct.
				-If disc is dirty or warped.
				-If it occurs, clean it or press it.
				-If TV is turned on and is in correct video
There is no picture.				mode.
				-If system connection is correct.
Picture	move	up	and	-If the signal system is correct.
down. Unsteady.
Cannot	continue	to	play	-If it is in A-B repeat status.
				-If it is true, press A-B button to cancel it.
and play a		section
				-If disc is dirty or damaged.
repeatedly.
				-If it is true, clean it or skip the section.
				-If there are obstructions between the remote
				control and the player.
				-If you are pointing the remote control at the
The remote control does				player.
not work.				-If batteries are inserted or the polarity is
				correct.
				-If batteries are weak.
				-If it is true, replace them.

Others:

Static or other external interfere may cause the abnormity of the player. In this circumstance, unplug the power-supply cord from the outlet. Wait 10 seconds and plug it in again to reset the player so that the normal operation will be resumed. If you are still having problems, then please disconnect the

- 28 -