Hitachi 32HDL51 important safety instructions Hookup Cables

Page 7

HOOKUP CABLES

Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable.

300-Ohm Twin Lead Connector

This outdoor antenna cable must be connected to an antenna adapter (300-Ohm to 75-Ohm).

Phono Connector

Used on all standard video and audio cables which connect to inputs and outputs located on the rear jack panel and front control panel.

“F” Type 75-Ohm Coaxial Antenna Connector

For connecting RF signals (antenna or cable TV) to the antenna jack on the television.

S-Video (Super Video) Connector

This connector is used on camcorders, VCRs and laser- disc players with an S-Video feature in place of the standard video cable to produce a high quality picture.

FIRST TIME USE

AUDIO OUT

2

3.8mm

STEREO

RCA TYPE

MINI-PLUG

PLUGS

Stereo Cable (3.5 mm plug to 3.5 mm plug)

This cable is used to connect from external audio out to the audio input of the AVC Center (ex. RGB Input).

IR Mouse Cable (Provided)

Connect the IR Mouse to the IR output on your AVC center when A/V Network is used. You must place the IR mouse in front of the corresponding IR window of your cable box and VCR. This connection allows your TV to control your cable box and VCR.

5 4 3 2 1

151014 9 13 8 12 7 11 6

D-SUB MINI 15-Pin Cable

This cable is used to connect a computer output to the ANALOG input located on the rear panel of the AVC Center. The resolution should be set correctly to display the signal on the LCD Television.

Subwoofer Cable (Provided)

This cable is used to connect an external audio component input to the subwoofer output of the Display Monitor.

Optical Cable

This cable is used to connect to an audio amplifier with an Optical Audio In jack. Use this cable for the best sound quality.

HDMI Cable

This cable is used to connect your external devices such as Set-Top-Boxes or DVD players equipped with an HDMI output connection to the TV’s HDMI input.

IEEE1394 Cable

 

This cable is used to connect your digital television to

 

external digital devices.This cable will carry both the

 

video and audio information.

7

Monitor Connection Cable (Provided)

This cable is used to connect the Display Monitor to the AVC Center.

1 6 2 7 3 8 4 9 5

D-SUB MINI 9-Pin Cable

This cable is used to connect to the RS232C input located on the rear panel so you can control some of your TV functions from an external home control system.

USB Cable

This cable is used to connect your digital camera to the Photo Input in the front of the AVC.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operating Guide for 32HDL51 Refer Servicing to Qualified Service Personnel Important Safety InstructionsPublic Viewing of Copyrighted Material Read before operating equipmentAVC and Monitor AccessoriesRemote Batteries Power Cord Monitor IR Mouse Control Subwoofer Cable Cleaning ClothLocation HOW to Setup Your NEW Hitachi LCD TelevisionSecuring to a wall AntennaViewing HOW to SET UP Your NEW Hitachi LCD TelevisionHookup Cables VHF 300-Ohm antenna/UHF antenna When both VHF and UHF antennas are connectedAntenna Connections to Rear Panel Jacks VHF 75-Ohm antenna/CATV Cable TVPhoto Input Front Panel ControlsRemote Control sensor Power button Display Monitor Main Power buttonAVC Power button Power light indicatorRear Panel Jacks RGB Analog Input SUB-POWER buttonUpgrade Card To Power Swivel ConnectorRear Panel of AVC CableCARD SlotConnecting External Video Sources Connecting LCD Display Monitor to AVC BOXBefore Operating External Video Source Connecting a Monaural Audio Source to INPUT1~INPUT5Connecting a Stereo VCR or Stereo Laserdisc Player Connecting S-VIDEO VCR or Laserdisc Player DVI to Hdmi Input Hdmi inputSee page 26 for tips on Rear Panel Connections Digital VCR D-VHS Connecting External Audio Amplifier Connecting External AUDIO/VIDEO DevicesConnecting AV Network Setup Procedure DVD setup example below AV Network Setup WizardSee Remote Control AV NET button usage on pages 31 AUDIO/VIDEO Codes for AV Network not for remote control Rear Panel Connections Tips on Rear Panel Connections Remote Control HOW to USE the Remote to Control Your LCD TV 480i/480P Input RGB Analog Input Aspect Display ModeAspect button RatioGuide button DAY/NIGHT buttonPICTURE-IN-PICTURE button Menu buttonAV NET button RemoteSelect TV Softkeys to learn, press the Select button AV NET Learning WizardPhoto Input Ant B Ant a Inputs buttonIeee Select this menu item to view the chosen picture number JumpRotate SlideshowWhen an IEEE1394 device is connected Info button When an S-VIDEOVideo Last Channel LC button Volume VOL WHEEL, Mute buttonChannel CH WHEEL/CHANNEL Selector buttons Dash buttonPICTURE-IN-PICTURE PIP POP Mode PICTURE-IN-PICTUREPIP button Ntsc PIP Mode PICTURE-IN-PICTURESplit Mode PICTURE-IN-PICTURE Surf Mode PICTURE-IN-PICTURESplit Freeze Main FreezeStrobe Freeze Exclusive TV buttons HOW to USE the Remote To Control Cable BOX FunctionsOperating the precoded function for your cable box Precoded Cable BOX buttonsPRE-CODED SET-TOP-BOX/SATELLITE Receiver buttons These buttons transmit the chosen precoded DVD codes HOW to USE the Remote To Control DVD FunctionsOperating the precoded function for your DVD player Precoded DVD ButtonsPrecoded VCR/PVR Buttons HOW to USE the Remote To Control VCR/PVR FunctionsThese buttons transmit the chosen precoded VCR/PVR codes Operating the precoded function for your Audio component HOW to USE the Remote To Control Additional Audio EquipmentPrecoded Audio Buttons Input Access DVD Brand Audio Brand OSD On-Screen Display Video Audio Aspect Channel Manager Locks Timers Setup SwivelPower Video Picture ModeBack Light Contrast ModeUse this function to adjust the amount of Back Light Contrast selectionColor Management Reset Video SettingsBackground colors Noise Reduction Auto Movie ModeColor Decoding Auto ColorInternal Speakers Auto Noise CancelPerfect Volume AudioDRC Language Digital OutputAuto Aspect AspectAspect Use this function to select the Picture Format Aspect RatioAuto Channel Scan This feature will select Antenna optionsChannel Manager Set The AntennaChannel List Signal MeterLocks Movie Ratings TV Ratings Canadian Ratings Eng Canadian Ratings English ChartCanadian Ratings Frn Set The Clock TimersSet Day/Night Timer Set Sleep TimerPlease Set Clock First Set Event TimerSet Timer Recording Menu Preference SetupMenu Background Image PowerScreen Saver Set The Inputs Video Power SaveGray Black Video 2 Auto LinkSet Black Side Panel AspectSet Closed Caption Caption ModeChannel Set AV Control This feature will select the source of the Monitor OutputSet Monitor Out CableCARD InfoSet Stand-By Mode UpgradesPower Swivel RGB on Screen Display Operation No SYNC. Signal Aspect Setup Power Swivel Move Power Swivel Unlock Brightness ContrastColor Aspect ResetPreset condition EnhancerFor current RGB format are adjusted automatically Auto AdjustPosition Adjusts the phase to correct blurred or unstable images Clock PhaseHorizontal Clock Black Side Real and Normal signals in Standard ModePower Swivel Input LevelDo not Care of Your Hitachi LCD Display Your Remote ControlIgnition Noise Reception ProblemsUseful Info SymptomsTrademark Acknowledgment Plug and PlayAgency Regulatory Information Outputs InputsHitachi Way Chula Vista, CA Home Electronics DivisionDigital Media Division Bass AccessoriesIndex 22-24END User License Agreement for Hitachi DTV Software END User License Agreement for Hitachi DTV Software Page QR62241
Top Page Image Contents