Hitachi 42EDT41 user manual Function Menu

OPERATING INSTRUCTIONS (continued)

FUNCTION MENU

		Picture				Function
		Audio					Screen Saver
		Timer			OK		Screen Wipe
MENU	CH+	Function					Black Side Panel
		Setup					Video Power Save
	CH-	Language					Freeze Mode
			Select				Default Zoom
			OK	Set			Reset
							Select	Set

Off

On 60Min. Off

Off

Split Panoramic Reset

Return

CH+

CH-

ENGLISH

Function
	Panel Life		Normal
	Mode Display		Off
	ID Number		1
	Inverse		On 60Min.
	Standby White		Off
	Gamma		2.2
	Reset		Reset
	Select	Set	Return

Selected characters

Setup hint

This moves the picture around the screen in small amounts, at set

Screen Saver

Off

5Min.

10Min.

intervals, to reduce the panel image retention. This is where

60Min.

40Min.

20Min.

stationary objects, such as screen logos, leave a slight image visible

after they should have disappeared.

This is used to reduce the panel image retention that can occur with

Screen Wipe

On

60Min.

stationary pictures by the white field signal. Select On (continuous

operation) or 60 Min. (time limit operation) and press the OK button.

Press the MENU or RETURN button on the remote control to return to

normal viewing.

This turns the gray sidebars On/Off when watching normal mode

Black Side Panel

Off

On

screen size area. It is always set to Off when the monitor powered

On. It is recommended to set to Off to reduce the panel image

retention.

Video Power Save

Optional (grayed out)

Freeze Mode

Optional (grayed out)

Default Zoom

Optional (grayed out)

Reset

(off the function)

(waiting to reset)

The original factory settings for the items of this Menu page can be

restored by pressing the OK button.

This function is to suppress the contrast of the screen regardless of

the Contrast setting in the Picture Menu. By this control, power

Panel Life

Normal

Extend 1

Extend 2

consumption can be reduced or degradation of a panel can be

mitigated. The order of power consumption is Extend 2 < Extend 1 <

Normal.

If the Contrast setting is changed when this item is set to Extend 1 or

2, it will be changed to Normal automatically.

This can display the Input Signal Screen Display every time the input

Mode Display

Off

On

mode and signal mode are changed.

Set to OFF if the Input Signal Screen Display is not needed when

switching signals.

ID Number

1

2

3

4

Assigns ID nos. to the monitors so that they can be controlled

7

6

5

individually (up to 7 monitors can be controlled).

This function can change each level of RGB signal invert to reduce

Inverse

On

60Min.

the panel image retention. When this function is required to use,

select On (continuous operation) or 60Min. (time limit operation) and

press the OK button. And press the Menu or Return button to exit.

Off

15Min.

30Min.

This function is also provided against the image retention. If time is

Standby White

set for this item, the screen changes into the white pattern when the

120Min.

60Min.

monitor enters power save mode, and it will continue for the period of

setting time.

Gamma

2.2

2.8

Normally set to 2.2.