Video Unit Function
INSTALLATION INSTRUCTIONS
Connecting to a Video Imaging Device
(1)Make sure that the power switch of the monitor is turned off.
(2)Make sure that the power switch of the imaging device is turned off.
(3)Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this device and the signal output terminal of the imaging device.
ENGLISH
To audio input terminals | To composite input terminal | 20 | 18 | 16 | 14 | 12 | 10 | 8 | 6 | 4 | 2 |
| 21 | 19 | 17 | 15 | 13 | 11 | 9 | 7 | 5 | 3 | 1 |
VCR
Adaptor
Do not connect both plugs at the same time. Use either of them.
Video disc player
Speaker (R) |
|
|
|
|
|
|
| Monitor rear panel |
| Speaker (L) | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power cord
|
|
|
|
| DVD player |
|
| |
To audio output terminals | To composite output terminal | To S video output terminal | To component input terminals | To component input terminals | To component output terminals | To audio output terminals | To component output terminals | To audio output terminals |
|
|
| Use if the |
|
|
|
|
|
|
|
| video |
|
|
|
|
|
|
|
| equipment | [An example of connecting video imaging devices] | ||||
| VCR |
| has an | |||||
|
| S video |
|
|
|
|
| |
|
|
|
|
|
|
|
|
input terminal
With DVI-STB and RGB component setup
To component video equipments.
Please use the connection cable suitable for the terminal form of video equipment.
•If video equipment with an S video output terminal is used, cabling by the S video cable is recommended to provide finer video quality. (If the S video input terminal and the video input terminal of AV3 connect to the monitor at the same time, S video input would govern.)
•If the OUTPUT (MONITOR) terminal is connected to an external monitor with a 75 Ohm terminal, it is possible to view the same image as on the main unit. But it is possible to monitor only the composite video signal from AV1, AV2, AV3 or AV4 input that is displayed on the screen at the time.
•If the adaptor is applied to AV4 input as shown in the drawing, it is impossible to receive RGB signal.
Applicable video signals for each input terminal (See PRODUCT SPECIFICATIONS for details. )
Terminal | RCA/SCART |
| DVI | Remarks | |
Signal | CVBS | PC | STB | RGB Component |
|
AV1 |
|
|
|
|
|
AV2 |
|
|
|
| Refer to Setup Menu. |
AV3 |
|
|
|
|
|
AV4 |
|
|
|
| Refer to Setup Menu. |
RGB1 |
|
|
|
| Refer to Setup Menu. |
RGB2 |
|
|
|
| Refer to Setup Menu. |
(