The Remote Control
2
1
3 3
2
2
3
2
To control a cable TV converter:
Program the remote control to recognize the brand of your cable TV converter (See “Operating the
Press CBL first.
1CABLE (CBL) button
This button allows the remote to control your cable box by setting it to CABLE mode.
2PRECODED CABLE BOX buttons
These buttons transmit the chosen precoded cable codes.
3EXCLUSIVE TV buttons
These buttons are for operating the TV.
2
1
3 3
2
2
3
2
To control a satellite receiver:
Program the remote control to recognize the brand of your satellite receiver (See “Operating the
Press SAT first.
1SAT (Set-Top-Box/Satellite) button
This button allows the remote to control your set-
2PRE-CODED SET-TOP-BOX/SATELLITE RECEIVER buttons
These buttons transmit the chosen
3EXCLUSIVE TV buttons
These buttons are for operating the TV.
The Remote Control
Caution:
• Never throw batteries of remote control into a fire.
Notes:
•Be sure to use AA size batteries.
•Dispose of batteries in a designated disposal area.
•Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.
•If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones.
•When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination.
•Always remove the batteries from the remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.
19
19 | 7/11/06, 8:07 PM |