Hitachi 50HDA39 Using the Locks menu, Selecting a password, To change your password

Page 25

Using the LOCKS menu

Note :

The V-Chip feature is available for the U.S. V-Chip system only. The Canadian V-Chip system is not supported.

You can prevent others from viewing certain programs or channels by blocking them using the V-Chip feature.

Selecting a password

Before you can use the V-Chip Feature to block programs and channels, you must select a password. The password you select prevents others from changing the rating limits you set.

To select your password and access the LOCKS menu:

1.Press TV to select the TV mode.

2.Press MENU, then press or to highlight the LOCKS menu.

3.Press or to display the password entering mode.

4.Use the Channel Number buttons (0-9) to enter your password.

If you are accessing the LOCKS menu for the first time, select a four-digit number to be your password. Press ENTER.

5.Enter the password again to confirm it, and then press ENTER. The LOCKS menu appears.

If the wrong password is entered, “ERROR” blinks about 4 seconds.

6.You may now set up the LOCKS menu. See “Using the V-Chip (parental control) feature” (page 26), or “Using the panel lock feature” (page 27.)

To change your password:

1.Press TV to select the TV mode.

2.Press MENU, then press or to display the LOCKS menu.

3.Press or to display the password entering mode.

4.Use the Channel Number buttons (0-9) to enter your password.

Press ENTER. The LOCKS menu appears.

5.Press or to highlight SET ACCESS CODE and press to display the SET ACCESS CODE menu.

6.Use the Channel Number buttons (0-9)to enter a new code. Press ENTER.

7.Enter the password again to confirm it, and then press ENTER.

8.Press EXIT to return to normal viewing.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿!"￿￿￿￿￿

Video Audio Setup Customize Locks

L O C K S

SET ACCESS CODE

[0 - 9]:SELECTENTER:SET EXIT:END

Video Audio Setup Customize Locks

LOCKS

CONFIRM PASSWORD

[0 - 9]:SELECTENTER:SET EXIT:END

Setting up your TV

25

3X80801A_En_p18-25

25

7/11/06, 8:07 PM

Image 25
Contents Plasma Television Do not Open Important Safety InstructionsFor More INFORMATION, Call 1-800-HITACHI Accessories Antenna How To Set Up Your New Hitachi Plasma TelevisionRemote control Features of your new TVExploring your new TV FrontSelecting a location for the TV Connecting your TVBack of TV Left back panelConnecting a VCR Connecting a cable converter box or antennaRear Panel Connections DVD Player/Satellite receiver Connecting a DVD player/satellite receiver and a VCRStereo VCR Connecting a DVD player with component video and a VCRFrom DTV Connecting a camcorder To connect an Hdmi device, you will need Connecting an Hdmi or DVI deviceTo connect a DVI device, you will need To control the audio Connecting an analog audio systemTV back panel If you cannot locate the device’s infrared sensor To connect the IR blaster cablePower connection Connecting a PC personal computerMonitor display modes Remote control effective range Remote ControlTo control a DVD player To control a VCR Using the remote control to operate your other devicesDVD button VCR button Precoded DVD Buttons Precoded VCR ButtonsCable CBL button To control a cable TV converterPrecoded Cable BOX buttons To control a satellite receiverOperating the pre-coded function for your VCR Operating the pre-coded function for your DVD playerOperating the pre-coded function for your cable box PreparationsDVD Brand Codes Device code tablesChanging the on-screen display language Starting setupProgramming channels automatically Adding channels to the TV’s memoryAdding and erasing channels manually Changing channelsSwitching between two channels Using the TV’s featuresSelecting a password Using the Locks menuTo select your password and access the Locks menu Use the Channel Number buttons 0-9 to enter your passwordTo use the V-Chip to block programs by rating Using the V-Chip parental control featureUse the Channel Number buttons 0-9 to enter your TV-Y7To unlock the right side panel controls using the menus Using the panel lock featureTo lock the right side panel controls To create channel labels Labeling channelsTo erase channel labels Selecting the video input source Setting the clockLabeling the video input sources To label the video input sourcesSetting the sleep timer Setting the on timerStandard ZOOM1 for letter box programs Scrolling the 169 Zoom picture 169 ZOOM1 and 2 only Using the Aspect feature Selecting the movie modeUsing the CC advanced feature Using the closed caption featureTo turn off the Closed Caption feature To view captions or textReverse Using the Long Life featureScreen Wipe Screen SaverAdjusting the picture quality Adjusting the picture Selecting the picture modeTo select the picture mode To adjust the picture qualitySelecting the color temperature Using the Noise Reduction featureResetting your picture adjustments To adjust the sound quality Adjusting the sound qualityMuting the sound Selecting stereo/SAP broadcastsUsing the Perfect Volume feature Resetting your audio adjustmentsTurning off the built-in speakers To adjust the WOW feature Using the SRS WOW surround sound featureSelecting the Hdmi audio input source To select the Hdmi audio input sourceSelecting the audio languages Checking the digital signal strengthSelecting the digital output format Displaying TV status information on-screenTo reset your video/audio adjustments Video/Audio adjustments in PC modeWOW TruBass Understanding the Power Return feature Auto power offTroubleshooting Useful InformationV-Chip system only Video Input SpecificationsFCC Information Useful InfoHitachi 3X80801AEnp44-Back 11/06, 808 PM Useful Information 3X80801AEnp44-Back 11/06, 808 PM J3X80801A SH 06/08 N