HOOKUP CABLES
Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use
FIRST TIME USE
This outdoor antenna cable must be connected to an antenna adapter
Phono Connector
Used on all standard video and audio cables which connect to inputs and outputs located on the rear jack panel and front control panel.
“F” Type
For connecting RF signals (antenna or cable TV) to the antenna jack on the television.
S-Video (Super Video) Connector
This connector is used on camcorders, VCRs and laser- disc players with an
AUDIO OUT | 2 |
3.8mm | |
STEREO | RCA TYPE |
PLUGS |
Stereo Cable (3.5 mm plug to 3.5 mm plug)
This cable is used to connect from external audio out to the audio input of the AVC Center (ex. RGB Input).
IR Mouse Cable (Provided)
Connect the IR Mouse to the IR output on your AVC center when A/V Network is used. You must place the IR mouse in front of the corresponding IR window of your cable box and VCR. This connection allows your TV to control your cable box and VCR.
5 | 4 | 3 | 2 |
| 1 |
10 | 9 | 8 | 7 | 6 | |
15 | 14 | 13 | 12 |
| 11 |
D-SUB MINI 15-Pin Cable
This cable is used to connect a computer output to the
Subwoofer Cable (Provided)
This cable is used to connect an external audio component input to the subwoofer output of the Display Monitor.
Monitor Connection Cable (Provided)
This cable is used to connect the Display Monitor to the AVC Center.
ANTENNA CONNECTIONS TO REAR JACK PANEL
VHF (75-Ohm) antenna/CATV (Cable TV)
When using a
VHF (300-Ohm) antenna/UHF antenna
When using a
To second antenna or cable system
To outdoor antenna or CATV cable
To outdoor VHF or UHF antenna
To UHF | ANT A/ANT B | To outdoor antenna |
| ||
antenna |
| or CATV system |
When both VHF and UHF antennas are connected
Attach an optional antenna cable mixer to the TV antenna terminal, and connect the cables to the antenna mixer. Consult your dealer or service store for the antenna mixer.
Antenna Mixer
8